Quoted from Isochronic_Frost:

Steve from PBR has a rubber kit everything but one of them is correct. I told him and I think he fixed it by now.
One of the sizes I think isn’t made anymore

Quoted from emspence:

I didn't use the kit, mine is still mostly incandescent but did use some of their bulbs. I don't think they had the retro ones then, so what I got is kinda bright compared to the original-which actually helps in some places on the backglass (like the dark game over and ball 5 etc). I used some of their color changing and "fire" bulbs for cool effects, as posted by a Tom Malloy on Facebook's EM pinball page (you can search there and find it, although video link now seems dead). Basically slow color change bulb goes behind the woman's face in the backglass, and "fire" bulbs go behind where the rocket engines are...I added another on the playfield behind the upper left plastic with a comet on it.
I just replaced the rubber kit on it with one from Titan Pinball. Used their kit, but changed the flipper rubbers to yellow. Would note their kit is short one of the little post rubbers (presumably missed the one in the ball drain).

Quoted from Isochronic_Frost:

Your cabinet is nicer than mine. Mine is more “together” but the entire bottom is swollen and the graphics are badly faded and flaking. I really want to build a new cabinet, just no clue how to remake the side art. It’s incredible!
My only other issue is one spinner is missing the decals entirely.
Any source for these or can anyone provide a scan?
[quoted image][quoted image][quoted image]
For whatever reason I don’t seem to have a picture of the playfield fully restored! Weird

Quoted from emspence:

The standard $4 lock from Pinball Resource works fine. I put one on the coin door & on the replacement I made for the backbox door. I think the original latch was still there for me to use with the new lock with the coin door, not sure if the provided latch will work...may need to fiddle around with that, but it will fit in the door just fine.