Quoted from pinballinreno:I installed the LEDOCD board in my Funhouse, its awsome!
I do think the red bundled cable set to the driver board could be a half to 1" longer.
Its a very tight fit.
My advice, wire it up before bolting the board down.
Properly mounted so that the backbox bolts are still accessible, and you can get a drill to install the screws in, the red cable will be slightly taught. A little too taught, but workable.
I've reported the same "too tight" issue on the cable set back to Harold a couple of times. Try sending him a note. The more people that alert him might have the effect of fixing the issue with the person he has making the cabling.
Dickinson, TX
