Corvette: It removed the unwanted blinking of the LT1 inserts in my during the skill shot. YAY! I set B1 and 2 to 0. So 0,0,10,25,50,70,85,100 Now only the one lane is lit during the skill shot like it should be. I have a bunch of inserts ghosting which I haven't been able to get rid of. These are the same inserts which ghosted before the board was installed. I might have to put the GBs back in if I can't figure it out.

LOTR: Stock settings except for the Palintir orb. I have the Eye of Sauron TV Ball mod which now blinks. Is there a way to stop the blinking? I set all B values to 100 but it still blinks.

SM - Using stock settings except in the Villain Mode inserts and white spider lane inserts. I set these to the recommended settings of 0,0,20,20,0,50,50,0,100. I had to replace the GBs with non-GB as they caused weird annoying strobing.

JM - installed GIOCD with no changes. Works great.

I have another WPC LEDOCD board but don't think my Shadow or JM need it.

Sorry, I thought I put that in there. It is set at max 9. But doesn't that just delay the amount of time between blinks? I set it to 9 so the little TV doesn't give me a headache.

I did not put one in the Shadow as the few times it fades the GI, it doesn't bother me. JM was horrible with the strobing though.

https://pinside.com/pinball/forum/topic/lotr-palentir-mod
I guess it is called the projection Palentir mod. And it seems it always blinked but I guess I just didn't notice it before.

Just the GI and it is now fixed with the GIOCD. the inserts are fine even with regular bulbs.

The Palintir mod is an early one. I see he sells an upgrade so I will try that. The videos show it fading on and off so I guess it did it before. But now it does it so fast it is annoying. I will play with the settings some more.

The LEDs in your JM don't strobe when the game dims the GI?