Installed Led OCD on my Avatar LE and wow what a great product. Ghosting is gone and light animations are so much softer.
I use Sterns default Led (bought at Cointaker)

I do have one thing with fast strobing lights (at a high rate). Like the red arrows in Navi hurry up mode.
It is done this way by default by the game's software.

Now it looks like the leds are always on now when the game does that with only slight dimming.

It is a little bit better by setting the delay to 1 instead of 3 but how should I handle this best so they shut off and light up little faster? I do want the brightness to remain at max (I like it bright)

Ok I found this (see picture). Profile 7 is used on all of them

Can I look at this like the curve stays lower (steps B1-B4) for a longer time and then suddenly increases quite fast to stay on the higher side (B6-B8)?
Resulting in a more blinky pattern?

How should I look at the delay 0 = no delay so B8 is the one that is immediately reached? But still respecting the minimum of B1?
How should I look at the delay 1 vs 3? Is this in milliseconds 1 = 10, 2=20, ..?

Thank you Herg!

ironman (resized).png

Thank you very much! I understand it more now. Will post back with my test results

Got the result I wanted. Thank you Herg!

First video with the NAVI hurry up strobing

Second video in attract mode to show effects still are good. My goal was to get the look the new Stern games look with leds.