Hi all

Just wondering if there is a cleaner out there that would be safe to use on my Austin Powers to just clean the playfield. Do not wish to do a full wax job at this point just clean the playfield. I did follow vids suggestion and vacuumed the playfield but since I just installed new flippe rubber a feed days ago, they have gotten reasonably dirty.

Again, looking for a simple cleaner that I can use as opposed to a compound if such an animal exists

Thanks guys

George

Already reading vids guide. Just thought that there may be some quick replies

So far have used novus 2 followed by meguires liquid carnival. Maybe slightly better than before. Going to try 3m finesse it

Hi Fellas

Thanks so much for the input!! I found that if the products that ibhadbinnhand this eve when I figured I had a few min tobtrybsknething, 3M Finesse-It worked the best at getting th dullingboff the playfield and cleaning it. Rags were awful dirty when I started an area before changing to buff it. Going to keep an eye on the flipper rubber now that I was able to clean he majority of the playfield and ramps and see if I don't see a reduction in gunk on the flipper rubber. Hope I do! Thanks guys