Dolly Parton
Bally, 1979You're currently viewing posts by Pinsider snyper2099.
Click here to go back to viewing the entire thread.
Quoted from adalogue:Good voltage to coil and works when jumpering coil lug to ground, so EOS works too. So not a power issue.
That does not prove that the EOS are making contact... but if both flippers lost power at same time, EOS is not likely the problem.
Your flipper connections are not making it to ground... Could be the driver board, could also be that the braided wire is not connected between cabinet and head. Or, even the head and the boards! A commonly overlooked issue...
Quoted from Deadcatch:Braid from cab is connected to head and I tested the ground test point on driver board so that doesnt seem to be the issue.
So to confirm, you tested these connections with a voltmeter?
I would swap out the driver board or, at minimum, perform all of the grounding upgrades on the existing driver board, outlined in the pinwiki guide.
You're currently viewing posts by Pinsider snyper2099.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/classic-bally-flippers-not-working-stumped?tu=snyper2099 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Cleveland, TN