Hello All,
This is my very first EM and is a project pin. I have been going through the machine cleaning and fixing issues as they come up. I have cleaned all the plug connectors, checked the fuses, a scoring switch on the playfield was stuck closed so I adjusted that. The coil on the scoring reel for 0-9 was burnt out probably from that stuck switch on the playfield, so I replaced that. So here’s where I am at. The game turns on and I get lights. I push the game start button and the score motor turns and starts up at ball 1. I have no flipper power, pop bumpers, or any of the scoring switches except 2 30 points switches have power. However when I press either of those switches the score motor will turn but the score reels will not turn at all. Also if I let the balls just go through the out hole it correctly moves on to the next ball in play and will go through all 5 balls and end a game and show game over. Any help would be greatly appreciated. Thanks

Thank you very much. Some of the wires on that schematic aren’t matching what I have. I can confirm that start relay fires and activates a game. I can confirm the game over relay fires and ends the game. I can confirm the out hole relay fires every time a ball is drained. The tilt relay is not working as I have manually activated the relay and nothing happens. I also tried and activated it via the tilt bob and nothing either. It seems to have no power to it.

Thank you very much. Some of the wires on that schematic aren’t matching what I have. I can confirm that start relay fires and activates a game. I can confirm the game over relay fires and ends the game. I can confirm the out hole relay fires every time a ball is drained. The tilt relay is not working as I have manually activated the relay and nothing happens. I also tried and activated it via the tilt bob and nothing either. It seems to have no power to it.