So Great to have found this group!
Recently picked up first CCM pin Casino which i'm in the process of restoring and falling in love with - came to me filthy and not working - with some "interesting" wiring etc..

if anyone has this in their collection, id be grateful for some help on the wiring of the 1st player 00-90 reel. Ive managed to reconnect loose/cut wires elsewhere but am baffled here. There are a pair of cut red wires not connected. Their length suggests that they should be on the EOS switch ( that and the fact that every other players EOS on the 10-90 has red going to one connection on the EOS). Here the EOS has a Black/green (maybe yellow) and a yellow/maroon to it.

thanks in advance for the help.

0-90 P1 loose wire 3 (resized).jpg

Thank you - Mystery solved - There is a broken Lug on the Make/Break therefore my not noticing it was M/B and assuming it was like every other switch.

Thank you

A6886F5D-B732-4DA4-A84B-5873A99A7E4D (resized).jpg

Thought I would share this here, I know most folks are in the states. A 1963 Bronco on offer in London. in good condition but way too expensive

https://www.ebay.co.uk/itm/115610539726

about the equiv of $1150 - OUCH

I am working on a CCM 1972 Coin Door. The door is black. I see some games online with Black doors and the Majority with what looks to be a Gun Metal finish.

I am assuming someone has painted it - or did some come off the line black? As you can see it's got "some" rust, both surface and under the paint on the RHS where i assume its not been dealt with correctly. Im planning on sandblasting it then starting from scratch. Question being to what. Think i prefer the metallic finish - what finish would be inline with their original state?

Any advice on conserving the Decal would be wonderful - was going to mask it as i assume removal would damage it.

Looking for plastic coin slots. i see Marco has them but not the right size also the credit button which was Red but as you will see has faded back to white- anyone know where these can be sourced.

Thanks in advance.

IMG_1573 (resized).jpg

IMG_1574 (resized).jpeg

IMG_1576 (resized).jpg

Thanks for this

Odd coil looking for a new home - Does anyone know what it is or even need it?

I took this coil out of the Casino I am working on - it had a lot of swapped out parts and hacks - including this "Phonographic 184-205" Coil.

Can not find reference to it anywhere. It measures at 13.5 Ohms.

Happy to pass it on to anyone that needs it... Heck I'll even xmas wrap it!

IMG_1791 (resized).jpeg

Thanks to everyone who helped me out with the info on my coin door questions. here it is 3 weeks later. taken back to metal, primed, new coin slots and inserts, new credit button decal and Hammer sprayed Gun Metal.

My next quest is to find a new credit button as the one with the machine is broken at the back and held in by a nail through it. Any pointers appreciated.

IMG_1836 (resized).jpeg

Looking for some advice on how to restore or even replace the ball in play card on Casino. The red on mine has all but faded into nothingness - you can see slight remnants of it on the bottom edge.
Ive seen restored ones online. Would love to know how to go about this....

Pics here of mine as it is and one i found online.

Thanks in Advance.

Screenshot 2023-02-02 at 09.44.53 (resized).png

Hey all. Im doing a repaint on my Casino. i took about 30 scans and stitched it all together. Happy to share the files if anyone needs them. Heres the side as an example.

Side_Panorama1 (resized).jpg

I recently had a new acetate made for my Casino - the printer did a run of ten as it was no difference in price for one. Does anyone need one of these FOC. I am in the UK and would be happy to send a few on to one person for them to distribute - will save me loads of International postage.

IMG_5262 (resized).jpeg

IMG_5263 copy (resized).jpeg

HI Peter - i stated out with your file and adapted, changed spacing and the fonts closer to the original - i have the file if you would like it.

kamal

Looking for 2 plungers /Operating link for a CCM Casino. Manual has the plunger and assembly as 393-2504 - cant find it anywhere. My machine has old links that have been cut down to "work" in the game.

PBR suggests STN-A197 which seems to look the part- they have no stock nor do Marco.
Anyone have any suggestions as to where I might find a couple? Otherwise I guess i could Cut another longer link down to size.

all help appreciated.

pics here of the adapted link out the machine / ref image from IPDB/ PBR replacement ( out of stock - since a long time )

K

IMG_6753 (resized).jpeg

ipdb casino (resized).jpeg

pbr (resized).jpeg