First things first: We have already changed BR2 which fixed our problem the 1st time I had this error, so we tried it again this go-round and nothing. On main board LED 1 and LED 3 are not lit. I only have 5V at TP3 (12V test point). We replaced the capacitor at C2 and re-soldered the fuse holder at F115. There is no continuity from pin 2 of 7812V regulator at Q2 to pin 1 of connector J114 (oddly enough, we do have a continuity to pin 7 and pin 5 of J114), *but we DO have continuity from pin 2 of Q2 to the negative lead of capacitor at C2.

What next? Chris or Llyod?

Can't hurt to give it a go. I'll check the deep freeze for fresh flounder for the next trip. Tell the wife I said I'm sorry I kept you so late tonight. Thanks for everyone's help on this, too, guys. Side note about this issue: We are unable to access the menu for any tests. Is this due to the F114/F115 error as well?

Whew! That's somewhat of a relief. One problem to rule them all. Fix it, and we'll be Gone Fishin again, and you can leave a message.

I can bring my board into town tomorrow while I'm running errands and you can compare it to you TAF when you have time to get to it. I know we both have our hands full this weekend with Easter and all. No rush.

Hey cousin, I'm sorry I couldn't make it by today with the board. I'm going through remodeling HELL at the moment. It's one bad thing after another. My AC in the attic was raining down on us from several spots - *Pins are still alright (still down) but unfazed by the water. The list keeps adding up over here. I can't catch a break, man.

The jumper hack worked and my FT is up and running again! Thank you to all that helped, and a BIG thanks to my cousin, Arcade, for having a little RC car that could.

*He snipped the wire antenna from the RC car to make the jumper wire. LOL

Pins>RC cars

#win