How well do you think these washers will work to protect the plastics? I'd been looking for a cheap alternative to lexan when I saw these nylon washers at Menards. They're a little bigger than the fender washers that came with it. Then I tried to cut one with tin snips and it went very well! I was surprised how well the light passed through it.
What do you think, good idea or terrible idea?
20180817_122713.jpg20180817_122854.jpgI wouldn't cut them like that. At least use a dremmel to shave them down so the edges are smooth.
I prefer the PETG washers since they're clear and less noticeable. Plus they are pretty durable. There are a few different sizes, so you can pick and choose which ones work best.
Also, when you're installing them, make sure to remove the post screw, put the washer under the nut of the post screw, then screw it down into the playfield. The gap between the washer and the plastic helps protect the plastic from getting cracked when the washer gets hit and flexes.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cheap-diy-plastic-protectors- and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Wichita, KS
Bermuda Triangle