Did you clean the new points with a stiff white business card?
I had to do that with my flipper switch on TSPP.
They put a light film or oil in manufacturing sometimes to protect them until it gets to the user.
(Topic ID: 196809)
Linked Games
Mata Hari
Bally, 1978
Topic Gallery
You're currently viewing posts by Pinsider CUJO.
Click here to go back to viewing the entire thread.
Quoted from phillyfan64:I don't think they are gold contacts. I got them from Marco. Part # 1A-120. I did not clean them but I will now. I checked for continuity between the blades. There's no short. The diodes are also new. 1N4004. They test ok.
I got my left flipper repl. leaf switch from Marco too and had to clean the contacts as I stated before with a white business card. I was scratching my head why they weren't working when they looked so good. Not one issue since swiping the card thru them several times.
Quoted from phillyfan64:They are 2.5". Brand new from Marco. I will mess with it tonight.
Take the sling rubber off and poke the switch with the end of a pencil eraser. See if you can duplicate the coil chatter doing this.
This will eliminate the rubber causing the bounce.
Promoted items from Pinside Marketplace and Pinside Shops!
Pittsburgh, PA
You're currently viewing posts by Pinsider CUJO.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
