(Topic ID: 117001)

Charlies angels no coin or test button works

By bartoparcades

9 years ago



Topic Stats

  • 10 posts
  • 3 Pinsiders participating
  • Latest reply 9 years ago by wiredoug
  • Topic is favorited by 1 Pinsider

You

Linked Games

Topic Gallery

View topic image gallery

aa.JPG
0130151858.JPG

#1 9 years ago

I just replaced my charlies angels SS cpu to a rottendog. I am at the stage where i need to chose a game and it wont move...it show Cleopatra....

i changed all my connectors A1-J7, A1-J6, etc.... so all new connectors

but i noticed on the A1-j6 3rd from the left is a PURPLE wire says STROBE 4 Coin

so i went to change the connector and removed the black tape.....the purple wire was not attached to anything....so i followed it back and there doenst seem to be a purple wire and it was factory wrapped with knots.....am i missing something is that purple wire what i need to access the TEST??

im stumped..thanks

0130151858.JPG0130151858.JPG
#2 9 years ago

first thoughts..

the tape is not factory

A1-J6 pin 7 is "spare" not a strobe.

try the test with J7 removed.

why is the orange wire out?

#3 9 years ago
Quoted from bartoparcades:

but i noticed on the A1-j6 3rd from the left is a PURPLE wire says STROBE 4 Coin

this is not true. strobe 4 is purple on A1-J7-pin6

#4 9 years ago

ok maybe i was looking at the wrong thing...anyways i got it to work but

the switches 40 (2) 41 and 42 (the C , H, I, C ) area is not triggering....the lights work but all4 switches are not working

#5 9 years ago

i replaced the connector also

#6 9 years ago

a1-j6 says purple on the pic...

my switches 40, 41 and 42 are under Strobe 4

in the pic it shows purple but when i removed the non factory tape that purple wire ended and there was not trace within the factory harness....

so makes me think im missing that purple wire

aa.JPGaa.JPG
#7 9 years ago
Quoted from bartoparcades:

I just replaced my charlies angels SS cpu to a rottendog. ...

Are you sure?? Is there a rottendog MPU for system 1 available??

#8 9 years ago

yes there is...NI-wumpf

#10 9 years ago
Quoted from bartoparcades:

a1-j6 says purple on the pic...

stop and start again .

the strobes in A1-J6 go to the COIN DOOR...there is no strobe 4 there..
the charlies angels manual confirms this .. so does the gottlieb solid state service guide. whats the source of your pic?

The strobe4 you think you mean is A1J7-6. But you are still wrong..

The switches you mention are on RETURN4 not strobe4 .. A1J7-16.

Promoted items from the Pinside Marketplace
$ 89.00
Electronics
That Old Pinball
Electronics
From: $ 2.99
From: $ 5.95
Playfield - Protection
The Pinball Scientist
Protection
$ 7.50
Electronics
That Old Pinball
Electronics
$ 4.00
Playfield - Decals
UpKick Pinball
Decals
$ 170.96
Cabinet - Armor And Blades
PinGraffix Pinside Shop
Armor and blades
$ 16.99
Cabinet - Other
Maine Home Recreation
Other

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/charlies-angels-no-coin-or-test-button-works and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.