Take a "special care" about MPU connector J2 pin 4, ("coroded" board, broken connector pin)
If "everything is OK", replace Z16 on MPU board
WARNING.... do that - ONLY if you have decent soldering skills !!!!
Greetings from Croatia
You're currently viewing posts by Pinsider cro_pinman.
Click here to go back to viewing the entire thread.
Take a "special care" about MPU connector J2 pin 4, ("coroded" board, broken connector pin)
If "everything is OK", replace Z16 on MPU board
WARNING.... do that - ONLY if you have decent soldering skills !!!!
Greetings from Croatia
Quoted from NerfHerder:.and it is the same problem in the two small displays at the bottom I forgot to say.
That is... !
You're currently viewing posts by Pinsider cro_pinman.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/charlies-angels-display-problem-1?tu=cro_pinman and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.