Hey there,

Had 2 lights out, both were all ok up to the board (1000 and Shoot again).
One of the 2 transistor looked fried, so I replaced both with TIP106. They are both now constantly on.
What have I done wrong?

Arh shoot, that explains why! Thanks a lot!

And up. Finally received the parts, did the change: no luck.
Could anyone point me to the right part that I could buy off ebay?
Still having issues with the 1000 and Shoot again lights.

Sure can!

20191003_114510 (resized).jpg

20191003_114518 (resized).jpg

Quench: yep; was referring to Q40
Yes both lamps were never on and they are still off now.

Ok, so I swapped Q3 and Q8; exact same issue, so you were right, it is not related to the SCR.

How do I test U1?

Thanks a lot but I haven't understood
Have a probe but never used it.
Could you detail a bit more how to proceed?

Hi Quench,
Now you read correctly On the first post the were constantly on as I had replaced the SCRs with TIP106.
After I put on the correct SCR, they were never on.

Will try this when I am back there and report!

Thanks a lot to both for your indications!