New! Dark mode!

Browsing Pinside at night? Getting tired of all the white? Switch to dark mode using the button in the top right (or CTRL-B)!

(Topic ID: 150637)

Champion Pub Issue - HELP!


By Skyemont

4 years ago



Topic Stats

  • 24 posts
  • 10 Pinsiders participating
  • Latest reply 4 years ago by Skyemont
  • Topic is favorited by 1 Pinsider

You

Linked Games

You're currently viewing posts by Pinsider skyemont.
Click here to go back to viewing the entire thread.

#1 4 years ago

The is strange and i can't figure it out. Maybe someone else has had the same issue. When i hit the ramp and it goes over to the boxing gloves, it says "jump rope".. What the F.... Also, sometimes when its over there at the boxing gloves, it will think i just finished jumping rope and the boxing gloves will stop moving and the ball gets stuck. Has anyone every had this issue?

#4 4 years ago

Thanks guys. I will keep you posted..

#6 4 years ago

still problems.. all switches work in game and test mode
i checked the wire connections - all look to be correct

could it be the game rom?

#8 4 years ago
Quoted from PNBLWZD:

Sounds like the switch harnesses for jump rope and speed bag plugged in wrong under the Playfield to me also. Haven't been inside mine for a while to see if they can reach to do such a thing though.
The bag and rope switches register correctly in test mode though?

The first thing i checked was to see if under playfield harness switches could reach each other. There is no way they can. In test mode the rope jumps and the gloves box.

#11 4 years ago
Quoted from Pizza-Bob:

I have a champion pub also and when the ball goes over to the fists it says flip kid flip which is the same thing it says at the jump rope. So I played a digital version on my phone from pinball arcade and it acts the same way.

Are you serious?

#17 4 years ago

When I'm boxing it says flip kid flip. But, it thinks it's jumping rope because when it's done and the jump rope bar stops, the pinball gets stuck at boxing gloves.

#19 4 years ago
Quoted from PinsideTroll:

short on the boxing glove area. make sure the switch behind boxing glove bag has the foam insulation. if the foam insulation is wore out it causes a short- if the foam pad is wore out it will piss it off, mine did the same. also, the coils under it need to have protection from bouncing around. i read it on here before. the plastic crap they put on the end of the coil terminals wear out. still trying to fix my boxer, he does not park in the right position, pain in the ass .....

damn... sounds like i should just do a complete teardown, fix this issue and led it.

1 month later
#22 4 years ago

Can some run a coil test and tell me if coil 26 works in test mode?

#24 4 years ago

UPDATE: PROBLEM FIXED.... Went to change the diode on the punching bag switch and noticed it was smashed up against the switch bracket where the wires are soldered on. Bent it back away from the switch bracket and now show works great.

Promoted items from the Pinside Marketplace
$ 50.00
$ 279.95
Lighting - Led
Pin Stadium Pinball Mods
From: $ 27.00
Boards
KAHR.US Circuits
$ 37.50

You're currently viewing posts by Pinsider skyemont.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside