(Topic ID: 238484)

CFTBL VUK Not Sensing Ball

By juandylan

5 years ago



Topic Stats

You

Linked Games

#1 5 years ago

Just picked up a CFTBL and everything worked fine when I went to play test it, once home, when I turn the machine on, the two VUK's on the right side start activating for a couple of cycles. Once I start the game, the ball travels to the these kickers via subway and just sit there not being sensed by the optos I suspect.

Lifted playfield, checked wires to the optos they looked fine. No broken or weird looking solder joints.

Any suggestions on next step in troubleshooting?

#2 5 years ago

did you check the connectors on your cpu? Try to reseat them.
Or try to do a switch test in the test menu.

#3 5 years ago

Had similar problem before time.May be not the same solution but:
-check on the VUK assembly if you have the small round rubber "rubber grommet" at the button.
Mine was missing and the ball was little bit not center right and the optos didn't sense that the ball is there.

#4 5 years ago

The easiest thing to do is go into switch test to see if it's opened or closed (if you can manually activate it). Then go from there. I'm not familiar with the mechs from that game, but it'll either have a microswitch or an opto that you may need to adjust or clean or replace.

#5 5 years ago

Tried re-seating all connectors related to the optos without any change in status.

In switch tests, the optos related to the issue show as open. When I place a ball in there, it doesn't come up as closed.

It's strange that when I push start, both kickers fire for about 20 seconds.

At a loss. It'l like two seperate issues right in the same area...coincedence?

#6 5 years ago

Did you try to clean the Opto's?

#7 5 years ago

Yes, cleaned optos. No change.

#8 5 years ago

could there be any battery damage on your CPU?

Promoted items from Pinside Marketplace and Pinside Shops!
$ 5.00
Playfield - Toys/Add-ons
UpKick Pinball
 
Wanted
Machine - Wanted
West Chicago, IL
From: $ 9.99
Eproms
Matt's Basement Arcade
 
€ 24.50
Playfield - Decals
Pin-Decals
 
7,600
Machine - For Sale
Anaheim, CA
$ 1,059.00
Flipper Parts
Mircoplayfields
 
$ 9.95
€ 24.00
$ 250.00
Lighting - Interactive
Professor Pinball
 
$ 30.00
Playfield - Other
YouBentMyWookie
 
$ 79.99
Cabinet - Armor And Blades
PinGraffix Pinside Shop
 
$ 27.95
From: $ 17.99
Eproms
Matt's Basement Arcade
 
$ 45.95
Lighting - Led
Mitchell Lighting
 
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
€ 25.00
Playfield - Toys/Add-ons
PPmods
 
$ 15.00
Playfield - Decals
Metal-Mods
 
$ 329.99
Lighting - Other
Lighted Pinball Mods
 
$ 109.99
Lighting - Led
Lighted Pinball Mods
 
Trade
Machine - For Trade
East Rutherford, NJ
$ 45.95
$ 69.99
Playfield - Toys/Add-ons
Lighted Pinball Mods
 
$ 280.00
Playfield - Other
Avid Creations Wireforms
 
8,000
Machine - For Sale
Portland, ME
$ 29.95
Lighting - Led
Mitchell Lighting
 
$ 54.99
Cabinet - Shooter Rods
Lighted Pinball Mods
 

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/cftbl-vuk-not-sensing-ball?hl=dwightheinink and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.