Hey guys,
Weird thing happened; the left flipper on my cftbl just died. It started sticking and then just died. Fuses are good, and suggestions on where to start investigating?
Any help is greatly appreciated.
Thanks!
Hey guys,
Weird thing happened; the left flipper on my cftbl just died. It started sticking and then just died. Fuses are good, and suggestions on where to start investigating?
Any help is greatly appreciated.
Thanks!
Wires to lugs soldered on good ? Fuse for it on fliptronics board blown ? ( pull and check with a meter ) If so a transistor involved likely failed too.
Does the plunger move freely in the coil ?
LTG : )
Quoted from LTG:Wires to lugs soldered on good ? Fuse for it on fliptronics board blown ? ( pull and check with a meter ) If so a transistor involved likely failed too.
Does the plunger move freely in the coil ?
LTG : )
Thanks Lloyd!
Looks like one of the wires was hanging by a thread… I missed it upon first inspection.
The flips is still sticking but I think it’s mechanical and not electrical
I may have to do a rebuild to it.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cftbl-left-flipper-issue and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.