I am in the process of reinstalling the power driver board from my Creature. Seems to be some confusion with J104 and J105. According to the manual it is showing J104 as white/red. This is not correct. My J104 is tagged from the factory and is white/blue and J105 is also white/blue. J104 is a 2 wire only connector. The other harness is 2 wires in and 2 wires out. I have looked at 2 pictures on the HEP gallery and 2 different pictures show tagged J104 on J104, and the other picture shows the tagged J104 installed on J105. Could someone with a Creature take a good picture to confirm if the tagged J104 is suppose to be installed on J104.