I want.
You're currently viewing posts by Pinsider thepinballpirate.
Click here to go back to viewing the entire thread.
Hooley Dooley! I had no idea this was a thing.
I just ordered a black light for the games room. Thanks for this.
Quoted from Ashram56:Makes you wonder, why didn't they add black light then if they took the pain of printing it in BL sensitive ink ? Or is that a coincidence ?
Makes me want to actually add blacklight inside the cabinet itself, need to find the right trigger for it (and where to put it)
Even just a little L.E.D. strip of U.V. light over the mural behind the rollovers.
Quoted from Staf:hi , new to the club . what is the best way to clean the hologram , its all covered in dust ?
Pressure washer.
I need help...
I just plugged in my creech after its been in storage for about 4 years. I have noticed a couple of microswitches no longer working. (The K-I-S-S switch for example) but also, the Snack Bar doesn't light up any of the Snack Bar Food Item lights like it used to. Is that a setting that has defaulted or is the switch cactus? Also, I have no ball save. ("stay cool Daddio") again, is that just a setting that has defaulted?
OK so I’ve spent the time reading the manual and found where to fix most of my issues.
But I still have a dodgy K-I-S-S micro switch.
Can somebody show where to find a replacement micro switch, please?
Quoted from Manny65:You can buy either just the replacement switch (you'll need to re-use the actuator arm from your existing switch) or you can buy a new switch with the specific actuator arm for that location. Page 2-41 of the manual shows the specific switch part numbers.
RTBB in Melb has both options in stock
https://www.rtbb.com.au/product/switch-subminiature-bare-5647-12693-00/
https://www.rtbb.com.au/product/micro-switch-5647-12693-21/
Cheers Manny,
Just ordered the complete switch. Didn’t even know this site existed, I’ve always just used Pinball Spares in Bayswater.
Thank you.
Am I dreaming?
I was sure there was a way to make the blue snack at item lights change order by using the flippers, same as the P-A-I-D rollovers.
I’ve searched through the adjustments menu but can’t find it.
Does it even exist?
At risk of sounding like an idiot,
Can somebody explain what a sound Rom is and how it differs from the CPU rom?
Ah, that makes sense. Thank you.
I just ordered revision 5 from Mr. Pinball.
His website is a bit tricky to navigate, though.
Quoted from drummermike:I used the standard sockets with LEDs and hooked them up to the rear flasher. They light when the ball is hitting the pops.
Better than just having them on with GI.
I also added lights under the outlane plastics.
So, if I want my pop bumpers to flash when they’re hit, do I wire an L.E.D. Into the coil?
I just cracked a billion points!!!
Been trying to do that for almost 10 years.
Not a bad way to start a Monday.
Is there a way to make each individual bumper flash when it’s hit, rather than all three flashing together?
This website says it adds about 5mm to the height of the bumper.
Is there enough room under the ramp far that extra clearance in a creech?
Quoted from drummermike:No. Just solder the two wires from the new lights that are in the pops to any of the flashers that light when the pops are hit. I used the rear left flasher.
My rear left flasher doesn’t flash with the pop bumpers…
Hmmm… maybe mine is broken?
That video didn’t show any ramp removal.
It did show that you can fit the pop bumper lights in under the ramps though!
Quoted from Manny65:Based on his profile, he's on the NSW south coast near Tathra. Ya practically neighbours ... give or take 1000kms
Not even, only 5 or 6 hundred k’s, I reckon.
Probably about the same distance to Melbourne.
But yes, 5 minutes from Tathra. Had lunch at Tathra pub today. Saw whales.
Does anybody happen to know the dimensions of the glass?
Just had somebody get a little over enthusiastic
MThompson,
You said you made a list of the L.E.D. Lights for your machine… haven’t got a copy by chance??
I’d love to see what you came up with.
I have NEVER seen these outlane lights lit other than attract mode.
Research tells me they light if the snack bar menu lands on “LITE SPECIAL”.
I took the glass off and must’ve tried to get this menu item at least 20 times. Is it a dud item like “HULA HOOP” ???
76AD5914-50D9-45F6-9406-EB4573A1067B (resized).jpegIs anybody in this forum any good at editing these 3D files? Would be nice to have him in more exciting position
The 32cm X 21cm X 13cm size says it made of poly foam board.
The 8cm X 26cm X 20cm size says it’s made of resin.
I have a little hologram replacement project in mind, but it kind of hinges on the smaller of the two being soft and pliable like the image suggests. The word “resin” makes me think it’s hard.
I guess I’ll just buy one and see.
No, I mean…
My question is for digdiglus.
He was experiencing flipper issues. I was asking him if the rollover lights are responding to him pressing the flipper buttons.
Quoted from Digduglus:So flipper coils fire in t12 test menu. But buttons themselves aren't registering in switch tests or play.
But only since you changed light globes?
It’d be a bit odd if it were related, but maybe try putting the original globes back in?
It’s remarkable how many of us Creech owners are here in Australia. I’m noticing more and more every time I read this forum.
Quoted from SCRAM:My play field window has cleaned up ok...not super, but I think it will be alright. However the decals/stickers have bubbles underneath and the top one is not even centred.
I can get a new sticker, but when I started to pull the old one off, it separated leaving the print and glue on the window, with just the clear back pulling off.
Has anyone tried removing these before? Any tips on what might be safe to use to help remove it without damaging the window?
If you just use a super fine wet’n’dry emry paper with water, it should polish up like a headlight lens.
That’s what I plan to do with mine
Quoted from NYP:Anyone know who has these backboard decals in the states? TIA
[quoted image]
I have these alternatives. I can send you a digital file if you want to get it printed yourself?
26DB8921-43A5-40DC-8F83-3F1483B6179D (resized).pngQuoted from AndyC:I have no idea why I didn’t do this back in COVID when I had the ramps out, but after seeing the chat here about the lighted pop bumpers I figured it just had to be done.
[quoted image]
Where did you get those pop bumpers?
Quoted from AndyC:I think I got the caps and skirts from Nino at RTBB sometime back and the LED inserts from Pinball Haus.
And you just went with the white L.E.D. Pop bumper lights? It looks good through the teal caps?
You're currently viewing posts by Pinsider thepinballpirate.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cftbl-fans-and-members-welcome?tu=thepinballpirate and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.