Hook me up!!!

Hi all. I'm in the midst of restoring my Creetch. I've tumbled every piece of hardware....I figured okay, maybe when straining the media, I'd lose a small screw, maybe a washer. But no....I've misplaced a mini post. The one for the inlane/outlane. Looked in the manual, says its a 02-4036 part. Subsequently went to Marco's site. Typed in that part number and it gave me two results. https://www.marcospecialties.com/control/keywordsearch;jsessionid=D64149581058C83490AA1449248FDCCD.jvm1?query=02-4036&viewIndex=0&viewSize=12&requestPage=search&sortOrder=score

One is a 8/32, other is a 6/32. Other thing that was odd is there is no female thread at the top of the post. Can someone point me in the right direction?? If possible, another supplier as well. Marco is killer for shipping to the great white north!

Hey guys. I bought my creetch about 14 months ago. I completely restored it, including clearcoating the playfield, new cab, Mike D mod, etc etc etc. The only thing thats missing is the deluxe speaker panel. I've been hunting high and low for one, all to no avail. I've posted on PPS's website, imploring them to do another run, no success.

So................by an offshot, does anyone know of where to get one of these? I'm particularly looking for the Deluxe version, mirrored. Thanks in advance.

Yep, I'd contacted them a while ago. Bummer!

Thanks to a generous pinsider....I've tracked down a Deluxe speaker panel. Now I need someone who can make the light kit......anyone??? I PM'ed Jeff Thompson, but no response so I have to assume he's out of the game??

Thanks in advance folks.

Long shot I know. Anyone have a light kit for the deluxe speaker panel??

Looks good bud!!

Need a small favour from someone who has the MikeD mod installed on their Creetch. Long story short, I had to solder in a resistor on the board last night, plugged everything in where it belongs (or so I thought), booted up the game, now no signal getting sent to the tv.

I don't have the install manual anymore, so I'm not able to confirm what I've left unplugged. Could someone kindly take a pic (or two) showing where the connections are made on the board?? Would be sooooo much appreciated!

My apologies....I should have been more explicit. The driver board in the head.

I had to solder in a resistor, thus had to unplug everything to get the board out.