Lewiston, NY
Thanks again swinks for a killer mod. Pink Open sign looks phenomenal especially with the snack bar mod. Well done!!
IMG_0444 (resized).jpeg(Topic ID: 79267)
Linked Games
-
Creature from the Black Lagoon
Bally, 1992
Topic Gallery
Quoted from Flash71:Thanks again swinks for a killer mod. Pink Open sign looks phenomenal especially with the snack bar mod. Well done!!
[quoted image]
glad you like it, enjoy
Jellat Jellat
Quoted from ThePinballPirate:There’s totally room for an extra flipper under this left plastic…
“THEORETICALLY” what would be involved in something like that?
[quoted image]
But... why? There's nothing for it to shoot...
If you really wanted to you could daisy chain the left flipper to it (I think that's how BK2K did it) but I'd imagine there would be a voltage drop.
Quoted from ThePinballPirate:You could shoot for the snack bar and the menu items…
It would only feed from ramp misses tho, and the bouncy rubber would make ramp shots harder. I’m gonna go hard pass on that idea.
Pinbarclay - How did the knocker solve work out, did you get it to where you wanted it? Also, how the DMD - liking it?
For anyone else - 1 Pin2DMD, licensed with colorization, cables/z-connector, and activation license: $275 shipped.
PM for details.
Quoted from Phoerber:Pinbarclay - How did the knocker solve work out, did you get it to where you wanted it? Also, how the DMD - liking it?
For anyone else - 1 Pin2DMD, licensed with colorization, cables/z-connector, and activation license: $275 shipped.
PM for details.
I'm thrilled with the Pin2DMD! Looks so good. Thank you for recommending and also for the help with the knocker. It's much improved (though I might add another piece of duct tape or two when I go to install my v5.0 chip - another big THANK YOU).
Are cup holders pretty standard across pins? Or is there a particular model I should choose for my Creech? I’m convinced my scores will improve if I drink more.
Quoted from Pinbarclay:Are cup holders pretty standard across pins? Or is there a particular model I should choose for my Creech? I’m convinced my scores will improve if I drink more.
I think there standard! Got mine shipped to Australia by a mate in America it’s awesome Always need somewhere to put your beer.
IMG_8136 (resized).jpegHi everyone! Just entered the club and wanted to share my first test run of a 8mm film projector as a CFTBL topper with you. Found the original movie in 8mm for cheap on ebay, still waiting for delivery, so for the time being I'm using another test film. Once the CFTBL film arrives it needs some cutting to create a non stop loop of selected scenes and the 220v projector will be triggered by a simple relay.
I'm still trying to figure out what exact signal to use from the pin to trigger the projector on and off as it should only start during multiball. If anyone would like to give input there, that woul'd be awesome! Right now i'm thinking along the lines of building a simple logic circuit to switch it on if voltage at the "start the move" lamp is detected and any of the 2 switches is triggered, but maybe someone more experienced with the pin can help out? many thanks, cheers, here's a video!
Quoted from Gorgar1:I think there standard! Got mine shipped to Australia by a mate in America it’s awesome Always need somewhere to put your beer. [quoted image]
I love that cup holder!!
Quoted from Pinbarclay:I'm thrilled with the Pin2DMD! Looks so good. Thank you for recommending and also for the help with the knocker. It's much improved (though I might add another piece of duct tape or two when I go to install my v5.0 chip - another big THANK YOU).
My pleasure buddy!!! Enjoy!
Quoted from Pinballemporium:Cleaning out the parts stash and found a new bowl from Pinball inc. with decals. $25 plus shipping.
[quoted image]
pm sent
1 week later
Quoted from Darkgoat:Hi everyone! Just entered the club and wanted to share my first test run of a 8mm film projector as a CFTBL topper with you. Found the original movie in 8mm for cheap on ebay, still waiting for delivery, so for the time being I'm using another test film. Once the CFTBL film arrives it needs some cutting to create a non stop loop of selected scenes and the 220v projector will be triggered by a simple relay.
I'm still trying to figure out what exact signal to use from the pin to trigger the projector on and off as it should only start during multiball. If anyone would like to give input there, that woul'd be awesome! Right now i'm thinking along the lines of building a simple logic circuit to switch it on if voltage at the "start the move" lamp is detected and any of the 2 switches is triggered, but maybe someone more experienced with the pin can help out? many thanks, cheers, here's a video!
I think this is a pretty amazing concept for a topper, and I hope you continue to develop it!
I recently tweaked my settings so that the time, day and date show when my machine is on. I recently noticed that from day to day turning the machine on and off the settings hold the date and time, but if I leave the machine off for a week or so the date and time are no longer correct. Everything else like high scores and even the score from the last game remain and I religiously change the batteries every 12 months and currently have fresh ones in. I know it’s not a big deal but just wondered if this was a common problem or do I perhaps have a slight issue somewhere?
1 week later
Quoted from Tiltbob:Joining the club today! I have some reading to do
[quoted image]
That's a clean looking cabinet. Welcome to the club!
Quoted from Fifty:That's a clean looking cabinet. Welcome to the club!
Thank you. Is there any feedback on the Mike D mod causing resets? If I plug into the maintenance outlet and turn on with the remote it works fine.
Just got back from Oregon Power Coating my CFTBL legs, cabinet side trim, lock down bar and head brackets. Had them all done in black hammered. I like this look as it makes you focus on the side art work and not what I had plated. It turned out very impressive.
20230703_135336 (resized).jpg20230703_135343 (resized).jpg20230703_135356 (resized).jpg20230703_135410 (resized).jpgQuoted from Tiltbob:Thank you. Is there any feedback on the Mike D mod causing resets? If I plug into the maintenance outlet and turn on with the remote it works fine.
I have never had resets from the mod. My original power board would reset. I added a Kahr board to stop that. (Some do not like this solution).
I now have a Rottendog board that eliminated the need for the Kahr. I have not had any issues with the RD. Had it in for many years. Fingers crossed. Pin and mod run fine.
Quoted from drummermike:I have never had resets from the mod. My original power board would reset. I added a Kahr board to stop that. (Some do not like this solution).
I now have a Rottendog board that eliminated the need for the Kahr. I have not had any issues with the RD. Had it in for many years. Fingers crossed. Pin and mod run fine.
Kahr boards are great.
Quoted from Tiltbob:Joining the club today! I have some reading to do
[quoted image]
Welcome! Looks like you've got a ColorDMD. Any other mods? How's your holo?
Quoted from Pinbarclay:Welcome! Looks like you've got a ColorDMD. Any other mods? How's your holo?
It’s pimped
with the Mike D mod
Quoted from Mikespinball:Just got back from Oregon Power Coating my CFTBL legs, cabinet side trim, lock down bar and head brackets. Had them all done in black hammered. I like this look as it makes you focus on the side art work and not what I had plated. It turned out very impressive.
[quoted image][quoted image][quoted image][quoted image]
This looks great. It should have come out of the factory like this.
Anybody know anything about these universal creature grave monsters listed on ebay, looks like a scam??
Quoted from robgo777:Anybody know anything about these universal creature grave monsters listed on ebay, looks like a scam??
ebay.com link: itm
They have been all over Facebook as adverts too. I'm betting it is a scam.
Quoted from robgo777:Anybody know anything about these universal creature grave monsters listed on ebay, looks like a scam??
ebay.com link: itm
It says it’s 26 x 20 x 8 cm. That’s pretty small
Quoted from robgo777:Anybody know anything about these universal creature grave monsters listed on ebay, looks like a scam??
ebay.com link: itm
SCAM, stay away!!
Quoted from pacman11:Alright I am back in the club and going to restore a project Creature that I recently picked up. Where can I find the LCD mod for the creature hologram?
[quoted image]
You can't. Only if someone here is looking to give one up and sell it to you. Be prepared to pay a large some of cash to get one.
Valencia
Quoted from pacman11:Alright I am back in the club and going to restore a project Creature that I recently picked up. Where can I find the LCD mod for the creature hologram?
[quoted image]
Holomodsp es the only interactive high quality product available.
https://pinside.com/pinball/forum/topic/hologram-mod-for-creature-from-pinballsp-is-under-development
Contact for orders and inquiries.
Email: [email protected]
Skype: pinballsp
Telegram: pinballsp
Whatsapp: +34693344445
Pinside_forum_3602030_2415204.jpgPinside_forum_3602030_2595835.jpgPinside_forum_3602030_2595834.jpg
Quoted from Tiltbob:It says it’s 26 x 20 x 8 cm. That’s pretty small
Yep, just got a response from one of the sellers that sent me a photo of what you really get.
See Attached.
Rob
Screenshot 2023-07-09 165139 (resized).jpgQuoted from robgo777:Yep, just got a response from one of the sellers that sent me a photo of what you really get.
See Attached.
Rob[quoted image]
Actually with some kind of backdrop that would be pretty topper appropriate…
Quoted from gunstarhero:Actually with some kind of backdrop that would be pretty topper appropriate…
Agreed. I always thought the other one was way too oversized. I didn't like that it covered the backbox art. The stupid price for one of them now is ridiculous as well.
Favorite replacement balls for Creech? I've never bought any replacements before and see a few different brands often mentioned. I assume I need three for this machine (despite 2 ball multiball!)
Quoted from Pinbarclay:Favorite replacement balls for Creech? I've never bought any replacements before and see a few different brands often mentioned. I assume I need three for this machine (despite 2 ball multiball!)
I have Ninja’s in mine. Yes, three
Quoted from qbass187:Same here. If you’re buying balls there’s no reason not to get Ninjas for your creech!
Where did you buy them from?
Bolzano
Quoted from qbass187:Hey guys, looking for one of the Pendretti CFTBL
Toppers. Let me know if you have one to sell.
Thanks!!
[quoted image]
qbass187
Some time ago I bought one trough his website. Unfortunately I never received It and after about one month I received my money back.
Quoted from Marco1973:qbass187
Some time ago I bought one trough his website. Unfortunately I never received It and after about one month I received my money back.
Yeah, Cointaker sells them in the US.
They swear to me they will be back in stock “eventually” but I figured it was worth asking if someone had one they were willing to part with.
Quoted from pacman11:Where did you buy them from?
Ballbaron.com
https://ballbaron.com/product/ninja-super-shiny-chrome-pinball-g10/
1 week later
Couple mods for sale. Ask any questions you have!
Promoted items from the Pinside Marketplace
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
