Long time Pinball player, first time pinball owner and poster to the forum.
I just got CFTBL and have successfully installed two mods. Under cabinet lighting from Mezel Mods and the Color DMD display.
Both work fine, independently, however, when both connected at the same time (via the J116) it results in the F116 fuse blowing.
Randy from ColorDMD suspected it was the bulb on the Hologram that was too high powered, however this is only 20w and even when removed the fuse still blows.
Is there another place I can plug either of these mods in to get power?
Or can anyone give some light as to what the issue may be and a possible solution?
Thanks
Jon