Hi Guys, Need pictures of the wiring layout of both flipper coils and EOS switches on a Centaur. Thanks Mine were completely gone from a project I got. Thanks in advance.
Bruce
Hi Guys, Need pictures of the wiring layout of both flipper coils and EOS switches on a Centaur. Thanks Mine were completely gone from a project I got. Thanks in advance.
Bruce
One wire from the end of stroke switch goes to the middle terminal on the coil. The other wire from the end of stroke switch goes to the coil terminal on the end where the silver band of one of the diodes is located. These wires are purple in the pictures below, but they can be of a different color.
The brown wire (two wires on the left flipper and one on the right flipper) goes to the coil terminal on the end where one of the EOS wire was installed (not on the middle terminal).
The green wire (left flipper) and orange wire (right flipper) go on the terminal that is left available on each flipper (coil terminal on the end where the silver band on the other diode is not present).
The wires above (brown, green, and orange) are part of the playfield wire harness.
Robert
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/centaur-picture-needed-flipper-coil-and-eos-please and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.