Hello to the club !

I had a very very worn out playfield, the worm had also fun with it. With a friend of mine we rescreened it. Due to the bad wood we had to print all the playfield. Here is the result.

If you are located in Europe and need a rescreen , just contact me. Outside USA is too expensive in shipping.

1 (resized).jpg

3 (resized).jpg

2 (resized).jpg

It will work but you have to work on the rollovers. I brought a piece of mylar over the rollovers, so the contact closes but the ball can not get stuck on this point, all other will work great and give the playfield a shiny touch.

It depends always what you are going to do with the pin. On my new machines is mostly no protector. But I had a Centaur with a new playfield but I knew that this machine will not stay too long at my gameroom. Therefor I installed the protector. So the buyer could decide to cut it away and has a brand new dimplefree playfield. Same actually on a ES with new playfield. If I sell it the new ownert has the chance to get a new playfield.
My keepers are not fitted with protectors ... I play my machines but know for sure , if I ever sell them the price is lower as if I had installed a protector before the first ball ...

Cheers
Tom

We have an other playfield rescreened and can offer it as "normal version" or black as on the pictures.
Just PM me if intrested.

BTW: The playfield on the pictures was shipped to the USA.