(Topic ID: 48888)

Centaur Club.....Members Only!

By vster23

8 years ago


Topic Heartbeat

Topic Stats

  • 1,435 posts
  • 238 Pinsiders participating
  • Latest reply 18 days ago by Dakine747
  • Topic is favorited by 96 Pinsiders

You

Linked Games

Topic Gallery

View topic image gallery

AEE0F422-72E5-4CE0-BF1C-60ED3EC0F2FF (resized).jpeg
FAE2643A-3E16-464E-BB49-A9C95D362685 (resized).jpeg
8F085A61-4E7F-4335-8FC9-BF834F854D9A (resized).jpeg
20211111_205237 (resized).jpg
075F52AA-C823-494E-A099-451058F29751 (resized).png
switch v2 (resized).jpg
centaur_champer_normal_ball (resized).jpg
Centaur playfield (resized).jpeg
Centaur (resized).jpeg
Centaur and Fathom (resized).jpeg
Card (resized).png
It's (resized).png
1373963-1_large (resized).jpg
56DE9561-21AB-4035-BF1D-E9DE4FA2F323 (resized).jpeg
C2E062AF-E18C-479C-8D5D-5CB63430F832 (resized).jpeg
46AAEC07-B17D-4D49-B720-961F757E341B (resized).jpeg

You're currently viewing posts by Pinsider Kevster219.
Click here to go back to viewing the entire thread.

10
#1178 1 year ago

Joined the Centaur club back in September. Definitely wasn’t cheap but, it has a new old stock playfield, near mint original glass and super nice original cabinet. Threw in a pinball pro speaker, LED’s, NVRAM, and some clear Titan rubbers. Works perfectly and fits in nicely with my collection. DESTROY CENTAUR!!!

A2621F6D-BAB3-4689-94D7-E761FF1A214A (resized).jpegD6FFE322-0896-4E54-98E0-85F8273F3AF9 (resized).jpegEEB663E6-D4C9-478A-9027-B9BC4E175432 (resized).jpegF30A6E53-26A3-49FF-B803-04C82DF743E0 (resized).jpeg

2 weeks later
#1185 11 months ago

No it comes with a new mounting plate that allows for the larger speaker.

Quoted from ghostbc:

Beautiful Game! Did you cut a larger hole in bottom of cab for the larger speaker or just mount it as is?

8 months later
#1366 3 months ago

So I have an odd issue with a Bally Centaur and an AllTek mpu. All switches are identical to the stock MPU, it has been reset and game switches are correct for this game. For some reason the magnet capture does not work with the AllTek, but works fine with the stock board. I have looked in the manual to see if there is an on/off magnet feature but did not see anything. Any ideas or could this MPU possibly be defective? Thanks

#1368 3 months ago
Quoted from Quench:

There is no feature to disable the magnet.
The magnet is controlled by the signal leaving the MPU board at J4 pin 8 (green-black wire) and goes to the solenoid driver board on J4 pin 10.
Have you re-terminated the J4 MPU connector yet?
This signal should go logic low when the magnet is to be activated.

Okay well thats a start thanks for that info. But I’m not sure what you mean by “re-terminated”?

#1370 3 months ago
Quoted from FatPanda:

new crimp connector on that wire

No I have not but I do have a new upgraded connector kit I can try. Just seemed odd it works with the original and not the AllTek after many attempts. I will try this and report back thanks!

#1371 3 months ago
Quoted from Kevster219:

No I have not but I do have a new upgraded connector kit I can try. Just seemed odd it works with the original and not the AllTek after many attempts. I will try this and report back thanks!

So Dave from AllTek just called me back and said to set all my coin doors settings to 03 as they are all on 00 now. So along with the connectors I am going to try that as well. I do know if you don't have setting 18 on “03” you will not get all the sounds.

You're currently viewing posts by Pinsider Kevster219.
Click here to go back to viewing the entire thread.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside