Having issues wiring up the magnet on a centaur II, can anyone send me a pic with the wiring. I know its an awkward shot but I'd appreciate it. thank you.
You're currently viewing posts by Pinsider Jkush18.
Click here to go back to viewing the entire thread.
Having issues wiring up the magnet on a centaur II, can anyone send me a pic with the wiring. I know its an awkward shot but I'd appreciate it. thank you.
Quoted from KJL:Here is a shot from Centaur (not Centaur II) which I am swapping right now.
On "this" Centaur there are 2 solder lugs screwed to the playfield near the main harness with a 1N4148 diode between them.
In the red circle, one solder lug has a double yellow power wire, the banded side of the diode, and a black wire from the magnet. The other solder lug has a grey with red stripe wire, the non-banded side of the diode and the other black wire from the magnet. I assume it is a diode BTW.
thank you for this. I assume it doesn't matter which black wire to either side of the lug?
You're currently viewing posts by Pinsider Jkush18.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/centaur-clubmembers-only?tu=Jkush18 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.