Here's mine, i'm very proud to be in that club. A true classic from the greatest arcade era !!
Restored with CPR repro playfield, plastic set. Near perfetc backglass with few LED.
Red incandescent lights at the Queen chamber and target 1-4. Red shield for the score display, look superb in person

IMG_5902.JPG

One of the best pin art from the early 80's !
I will swap my playfield very soon.
I removed the inserts, sand them to remove the cracks and wear.
Glued them back and CPR made the rescreen process. (Thanks for that absolute great job)
I'm a collector purist and i'm very lucky and happy to put back an original playfield
restored with the original screen and process.

IMG_5952-2.JPG IMG_5952.JPG IMG_6051.JPG IMG_59572.JPG

The spike shooter rod is for Xenon, Centaur got the normal round one.

I'm officialy in the Club !!
Amazing pinball art.

IMG_6301 (resized).JPG

It's an original playfield rescreened by cpr using the original films. I restored all the inserts to remove cracks and they are now crystal clear for a much better lightning effect.
I asked no clearcoat, that way i completed the artwork around switches to remove wood effect and made corrections where
the art was not perfect center with the playfield inserts. I clearcoated it to complete the restoration.

I installed lexan plastic protectors for the return lane plastic and finally had the idea to raise it similar to EBD.

IMG_6306 (resized).JPG

IMG_6303 (resized).JPG

IMG_6304 (resized).JPG

I would like a solution to fix ''weak'' magnet when hitting the target for multiball release.

Not sure it's an original, it look like the repro from the 90's.
Lot of people mix the two versions.
Repro doesn't have the light block layer printed in the back.

No repro glasses are the same as an original. And today no more reproduction are screened as the original process, they are ink printed and worse specially with light thru them.