Need a little help please. Fired up my Centaur 2 today and absolutly no sound at all. Never had any problems with this game before. Still boots and plays great. Where should I look? I have checked and reseated connectors for both sound boards.
Thanks in advance!!!
brian
Rotate the pots on the sound board, rotate the pot on the coin door.
If the original caps are still on the sound board they may have finally gone out of spec/dried up.
Or the SIA board/chip has gone. Definitely try the pots on the S&T first though. If still nothing, try removing the "FF" jumper n the S&T to see if you get sound- if you do, the SIA board isn't working. If still nothing, it's probably trouble with the S&T itself somewhere. Replacement SIA boards are available from Big Daddy Enterprises, even though they might not be listed yet.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/centaur-2-sound-trouble and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Streator, IL