Hi,

This is a backglass from a CC Gun Smoke. Sometime thru it's life the back of the glass was covered with clear sheets of plastic film. Now as you can see the film pulled the ink off the glass. Is there a way to save the section that is lifting? I was thinking of cutting around the lifted edge so I can lift it back and spray triple thick and lay it back down with some weight on it to see if it adheres better.

At this point, I don't want to have a new glass made.

Thank You
Steve

blackglass (resized).jpg

Thanks for the idea. Just need to find mylar sheets.

Thanks Skidave