Super nice guy and very approachable...parents are awsome too
If you ever see him say hi and be sure to watch him play he is something else and glad he's canadian

I have Titan rubbers on most my pins and no complaints here

No I haven't but a friend has and he says they are good

This is how we celebrate our first lyear

image.jpeg

Can't forget the belt holder

image.jpeg

Thank you everyone for a great year and look forward to next year !!

image.jpeg

We have a league that we do monthly and we usually have a tournament outside of the league roughly every 4 months .

Bring it on Dan ...The cup Will Return to Edmonton

I too had a good time ...great to some old and some new people ...looking forward to next league night

Congratulations Ryan James
And thank you to everyone that came out ...had a great time

I also have to give Rick a shout out for getting ball stuck in the weirdest places on my Jurassic Park.....who woulda thunk!

And thank you to pingod for helping me out with machine and ball issues

Yo Vinny

No no pics but they were goodies

I think there is room for Ghostbusters

Thank you volkdrive

Fishing and pinball
My 2 favourite things in one place

I have a 14' Shuffle board and it gets used alot...always good to shoot some pucks after some balls

Good luck Derek!

Anyone have any spare 74hc4514 chips to sell?

Thanks puck

Last time I was at kosmos they had a AC/DC pro and Boston pizza had a stern batman
The laundry mat by royal pizza has a beat up earthshaker and pinbot

Yup B.C. Is good
I wanna say it's cold here but not compared to what you guys are feeling

Ya it was a little dirty when I played it last but flipper rubbers were ok
I was just happy I was able to do 2 of my favourite things
Drink beer and play pinball

Looks like bob is the poster so I would say it's legit

Who woulda thought being sick could be fun

Wow almost hard for me to remember when I did t have a cell phone and going on 8 years now without landline or fax
If worried about a bill just ditch the landline and get a cell.
Do they still charge for long distance on land lines within Canada?

Another vote for digikey shipping time and cost....if only pinball parts were like that

Boston pizza in Leduc has a Batman dark night. Laundry mat by western budget has a beat up pinbot and earthshaker

Finally got a record player for Xmas so I can play some of this. Now it’s time to break out the rest of my collection.
Been over 30 years since I’ve listened to some of these on vinyl.

84D94FA5-9BAA-4D1B-A3D8-27628F4E84B0 (resized).jpeg

You bet Tommy
This a plast from the past
I Love It!!!
I sure miss vinyl

Haha that would be awesome. This album wasn’t a easy one to find but found a new still sealed one out of Quebec ...cost a few dollars but one of those things I had to have.

Rob still seems to be playing the saskatoon show on Aug 6

I use Chris at addictive powder
Pm me if you want his contact

Looking good.... I know of a place that could use a few of those signs.

Yes we live stream tourneys and league nights on twitch. Super easy with new wireless camera rig to move around to different machines. The guys did a great job with the layout on twitch and commentating is good too. I dont have a link handy but if you search DHPL you should see something pop up.

I believe that was mine. Was it his first machine?

It's about time

Got the call ....heading out to pick it up

I wasn't able to be there for the set up yesterday but I'm hoping to get there today and will have a look and let you know what i find.

Update
Simple fix ... the right flipper bat didn’t have any spacing from the bushing so it was binding. Adjusted the bat and bushing space and good to go.

Yes....but i have to say if anyone quality tested this machine it would have been obvious and shouldn't have left the factory floor until fixed. I was not able to make a loop or ramp shot with that right flipper and barely the center scoop.

No nothing i can do unless change flipper coils. They are good but not great.... Just a typical JJP sling strength, not sure why but it may be as there overall sling length(post to post) is too short maybe. To look at the mechs and stock coils you would think it should be good.

I have to say ...whoever is getting one will love it, Beautiful game
"You could be mine" multiball was intense.
Yes a few too many multiballs and definitely need to change some settings as far as add a balls and ball saves and make mutliballs more difficult to get.
Ohh one other thing i noticed was post rubber missing between inlanes on left, not sure if this is done on purpose.

I didn’t really look at playfield yet but will next time and let you know. But I think it was good as nothing jumped out at me. EFA51C16-C72E-4BCA-96CF-D4C9F40A53CD (resized).jpegEFA1F7FB-24DE-4E33-A627-8BE98B21850C (resized).jpegE531CE67-AF61-4486-8BA4-BBDAF23EE014 (resized).jpegDB5429F2-66BB-4847-B3E5-FD302F9C94B1 (resized).jpegA40463C9-665E-4A96-AD57-29D1DDAFC0EB (resized).jpeg990120FB-2158-4EAA-BD15-90361067B926 (resized).jpeg97C31EE7-E9DD-4887-BD25-4E6BEC867B50 (resized).jpeg6E158D2C-EED6-47E3-A5D2-49DBB3907BEF (resized).jpeg0CB757E0-CF38-4432-9785-38EDE97C35CE (resized).jpeg
Here are some pictures of the rubbers I changed today from not even a week of play and you will see where one broke off which may be a future problem as it was digging in the lane guide beside so I tried to adjust the travel so it does t dig in but unfortunately you can adjust too much as there is a hole under flipper and tried adjusting the lane guide but really can’t as they have through hole lane posts. They must from same supplier as spooky as the ones on Alice were bad to but last a bit longer. Also included of some rubbers that were missing even before Derek got to it lol. I also adjusted the magnet as it was a little high

I went there a couple years ago ....anyone who goes has to for sure stop at one of the gift shops and have some street cooked Korean BBQ Chicken.

20180830_020059411_iOS (resized).jpg

20180830_020951769_iOS (resized).jpg

20180830_022354113_iOS (resized).jpg

Great job derek!

Anyone in Regina can help a fellow out with some legs. I sold a black hole last month to a guy in Regina and long story short the tried to steal it out of his basement. Good news they were unsuccessful but got away with keys and legs. He's not on pinside so i figure i reach out here and see if anyone has some legs locally he could purchase and get him back to playing his game.

Ya by the looks of it from pic i seen they got it to the back door with the head on and left it there.

Ok ill let him know...Thanks

PM Sent

Yes for sure but figured i start closer first

Thanks for all the help guys but i think we got something going now.

The price was right lol.
It had a cool vibe in that basement I thought, but it sure got hot with all those machines and low a ceiling with no good ventilation and a/c.

Might as well get some sling rubbers too as those will be going soon. Unfortunately GNR came with some cheap rubbers.

Great going guys!

HA HA love it, but not even close

Everyone start setting up burning barrels on your driveways and start burning your trash. See what city does then.

Did someone say Alien Poker
Me win… you lose

The rails on newer sterns have to be stripped first as the metal is to thin to blast old powder off.

Give Nitro a try…. But I heard through the grapevine that they will go to locations first then to public… not sure if that’s correct info though

Go with the red ones

Looks like a great place....glad to see more of these Canada.

That place has grown into a neat entertainment place.. it used to have a cool shuffleboard type game where you stabs in the floor and play…. Did t try it but looked fun. good to see pins added a few years back. I suggest anyone in the area stop by for a beer or bowling or pinball or all. If memory serves me right that place used to be an old Tabacco company.

We stock titan rubbers at arkadium.

I know a guy that has a couple for sale... I think he was asking 9000 for the pair. I have no idea if that is a good price or not, but they were more modern touch screen ones.

2 things I remember about the PNE back in 79 or 80 was Hercules and room temperature milk drink boxes up and coming and giving out free samples.

Hi BMGfan, I am Gilles.
Unfortunately I won’t be taking on any more work till further notice. I have too many restores sitting in shop and others waiting to come in. I would like to help you out but can’t right now.
But like Tinn was saying it’s not really as simple as shooting it and be done. It usually takes prep work then multi coats with sanding in between and of course a final sand and power polish. If you have any questions shoot me a pm and I can help that way.

With a name like Gilles the other one must be in the east lol
I can’t believe other people named their kids that