Great idea
I'm sure il will use it a time or eight
You're currently viewing posts by Pinsider stretch7.
Click here to go back to viewing the entire thread.
Ya i noticed looking around everyone only seems to have the one side. that was my next step to reach out to one of the plating guys and see if they will just sell gun.
Looking for a A-14689 Coin door interface board as well as push in style IDC lamp sockets that you see on many Wpc light boards.
Quoted from Dee-Bow:Looking for pinbot plastics that are not cracked/damaged.
I have some new and used pinbot plastics but not sure if they are the ones you are after but will take a look later and let you know.
Anyone local interested in lyman ultrasonic cleaner for $50.00
Bought a new one and dont need this anymore.
https://www.lymanproducts.com/turbo-sonic-2500-case-cleaner.html
Quoted from jesperpark:Does anyone have a spare bumper post from a data east
I might have one as well but could be used to if thats ok?
Ill confirm later today.
Quoted from ImNotNorm:Looking for a sub switch for the right ramp of my TFTC.
I believe i have the switch with adujustable blades so you can make your own or if your blade is goos and just nned micro switch i have those too.
Dont think i have one but i do have wire and a bender and could probably make one but would need an original to work from.
I just ordered some from PBR
Quoted from RandomTask:Where does everyone get their Stern/SAM light sockets. IDC style. I have some that are broken
Would you happen to have Williams Bonus units from a Grand prix and if not would you have the metal sprockets from them?
I should have what you need....i wont have lots but how many do you need of each.
Quoted from northerndude:d buy some 4 position and 2 position molex connectors.
Quoted from schwarz:Not sure I love the gloss, hate the gap by the side rails.
Glossy they are.. which i like, There shouldn't be a gap at side rails ...you keep tight to side rails if anything you leave it short at the bottom of cab.
If your looking for chrome there is a place in calgary ...Dont know the name of it as stuff out here just gets shipped down there.
Quoted from Fytr:I have an old TaF speaker panel board
Is this just the face panel or does it include the back board as well?
Quoted from Pinhead306:Hello I’m looking for an mpu board for a cheetah. It has an alltek at the moment but I’m looking for a board I can put the tournament code in. Thanks very much.
You can also look at the weebly mpu board that will let you run a custom rom in as well.
Quoted from Stretch7:Looking for Hokus Pokus and Jungle Princess backglass if anyone has one?
Jungle princess has been found just looking for a Hokus Pokus now
Quoted from wolffcub:Looking for a newer stern plastic apron in the Edmonton area. If anyone changed over to a insider kit and want to sell the old one let me know.
I have some at the arcade and i think i have one or 2 in my shop.
Quoted from Gunner007:Anyone have a better way of getting parts shipped from Marco to Canada.
I have had great shipping experiences from Marco....expensive yes but cheaper than what it used to be years ago.
I usually place my orders Sunday night and will be here tuesday afternoon. sometimes will be a wednesday.
Not sure how you do it but i place order then select international shipping. this will give you option of 1-2 day shipping or 2-3 day shipping.... i always go with the 1-2 day as it is usually only $10-15 more cause sometimes getting stuff on time for repairs is crucial. I do at least one or multiple orders monthly.
I find planetary or pinball life will take a week though even if you select 2-3 day shipping, i can usually get pinball centre in Germany within a week as well.
The only one that takes the oldschool 2 week wait is PBR but i dont think they will change their ways any time soon.
You're currently viewing posts by Pinsider stretch7.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/canada-pinball-parts-wtblts-official-thread?tu=stretch7 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.