Wellesley, ON
Looking for a set of stern/sega lollipop rails in canada. To big to ship from the USA
(Topic ID: 184076)
You're currently viewing posts by Pinsider Mitch.
Click here to go back to viewing the entire thread.
1 year later
Quoted from libtech:No kidding, was going to order a few bolts, and shipping is way back up at marco - about 40usd for 5-10 bucks worth of screws!
It's based on weight and bolts are heavy
2 weeks later
2 months later
Quoted from ImNotNorm:You sell NVRAM for Data East astill ?
Yes he does. Send him a pm.
1 week later
They are not correct William's uses a flat display with a main controller behind the light board.
The link you posted is for the bally/stern displays that have the circuit board attached and go into the metal tray on the light board.
100% different.
Come on Tommy you should know better.
https://www.marcospecialties.com/pinball-parts/PS-8000-P
These are for blackout. On the William's games you cant replace just one display with LED display. If your going to go LED display on William's you have to replace them all and the main board that controls them all at the same time.
5 months later
Looking for 3/16 nyliner.
I bought all the parts I needed to rebuild my Sopranos pinball machine and the 3/16 nyliners I got from marco are some new style grey ones. They dont work properly on the safe rebuild. Does anyone have 2 of the older white ones.
1 month later
Quoted from schwarz:Looking for a ball guide post, Bally C-907, two piece with the C-908 cap.
I have an arm and a leg to trade.
I'm sure I have one. Have a populated Bobby Orr I can take it off of if you dont mind shipping.
1 week later
Quoted from LongJohns:Looking for EM parts and/or assemblies. Let me know what you have.
What do you need?
I have a bally parts head
A full Gottlieb wedgehead minus playfeild for parts.
A genco cab for parts.
Quoted from Fytr:I need the metal door for the head on a '77 single player Gottlied wedgehead...
That I dont have.
2 months later
Quoted from TheShaft:What are the best options for buying lights in Canada?
I buy from astil good price and product
3 weeks later
1 month later
Quoted from mad_carl:Any have a crane toy gearbox/motor assembly for a Data East Last Action Hero, or another gearbox that may also work?
also looking for a game manual/schematics.
I think I have a original manual if you want. $20 plus postage.
1 month later
Quoted from jesperpark:Does anyone have an extra AN-26-1220 or a AO-26-1200 coil they are willing to sell? It's for a Flash Gordon slingshot
Yeah I could order one from the states, but hoping to find one localish
If stretch doesnt have one send me a pm I have tons of parts and coils from populated playfeilds.
2 months later
Quoted from Stretch7:Would you happen to have Williams Bonus units from a Grand prix and if not would you have the metal sprockets from them?
Sorry I dont.
I recently pick up a load of rotten em machines that I'm parting out.
NO BACKGLASSES OR CABS.
I have parts from the following machines. Let me know what your looking for.
Bronco
Mustang
Jet spin
Solar city
Volley
Old Chicago
Recel lady luck
Chicago coin sound stage
Chicago coin show time
Zac universe
Liberty bell plastic set
2 weeks later
5 months later
Quoted from fast_in_muskoka:I am looking for 2 black 28.5" pinball legs, hopefully in Central Ontario area.
What style
You're currently viewing posts by Pinsider Mitch.
Click here to go back to viewing the entire thread.
Reply
Wanna join the discussion? Please sign in to reply to this topic.
Hey there! Welcome to Pinside!
Donate to PinsideGreat to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
