(Topic ID: 184076)

Canada pinball parts WTB/LTS official thread.


By puck

2 years ago



Topic Stats

  • 392 posts
  • 85 Pinsiders participating
  • Latest reply 3 hours ago by DodgeThatOne
  • Topic is favorited by 84 Pinsiders

You

There are 392 posts in this topic. You are on page 8 of 8.
#351 73 days ago
Quoted from TheShaft:

Does anyone have an LED OCD board available to go in a LOTR?I do, well its @tuxedomask23 's but I have it and I think he would sell it. PM me

1 week later
#354 63 days ago

Going to put up a bunch of extras for sale here shortly. Pretty much all Williams/Bally stuff. A bunch of 1993 indy, some T2. Lots of general stuff like coils, sleeves and other common items. I've been hoarding for close to a decade so I don't even know what I've got yet. A lot of the Indy stuff was from my cancelled plan of building a machine from scratch so I hoarded a lot of boards. Then I got a super nice indy so really no point in having some ofthis stuff. Stay tuned. I may just make a regular ad and refer to it here.

PS I don't have any spare Power driver boards or CPU boards at this time but may sell a couple aftermarket ones later.

#355 63 days ago

Have a complete Pinshakers Kit available if someones looking? Its compatible with WPC and WPC95 games! Comes with both Flasher and Solenoid Harness
almost new barely shaken! $225.00 plus shipping!
Canadian dollars new from Pinshakers $225.00 USD plus shipping

#356 62 days ago

shaker motor sold and gone to a great home!

#357 62 days ago
Quoted from transprtr4u:

shaker motor sold and gone to a great home!

Dammit

#358 62 days ago

I have a DMD from a data east star wars I just pulled to add a color DMD, works without Issue. Any Interest shoot me an offer as I'm not sure it has much/any value.

#359 62 days ago

Looking for a ball guide post, Bally C-907, two piece with the C-908 cap.
I have an arm and a leg to trade.

#360 62 days ago
Quoted from schwarz:

Looking for a ball guide post, Bally C-907, two piece with the C-908 cap.
I have an arm and a leg to trade.

I'm sure I have one. Have a populated Bobby Orr I can take it off of if you dont mind shipping.

#361 61 days ago
Quoted from Hammerhead:

Selling my White Water Boulder shooter rod. Used but in good condition $50 shipped.

This has been sold

#363 60 days ago

Looking for a transformer for a williams sys 9 Space Shuttle

#364 60 days ago

Anyone happen to have a display for a system 11? I picked up a project f14 that has a non working display. Cheers

#365 57 days ago
Quoted from Pinhead306:

Anyone happen to have a display for a system 11? I picked up a project f14 that has a non working display. Cheers

Hey, is the entire display out? maybe its a voltage thing? All four displays out would be whack....
I messaged you, but I just swapped out my new display for my Time Machine, out of the 4 displays, it has 2 perfect displays, 1 partially gassed and 1 dead. If you want it for parts, or to grab a couple of the displays out of it, let me know, I can let it go super duper cheap if it helps you out.

#366 55 days ago

Anyone have a Shaker motor SAM-Rev B or color dmd that works on a MET for sale?

#367 55 days ago
Quoted from northerndude:

Hey, is the entire display out? maybe its a voltage thing? All four displays out would be whack....
I messaged you, but I just swapped out my new display for my Time Machine, out of the 4 displays, it has 2 perfect displays, 1 partially gassed and 1 dead. If you want it for parts, or to grab a couple of the displays out of it, let me know, I can let it go super duper cheap if it helps you out.

Just the one is out, I think it’s dead. I’d definitely be interested in one of your working used ones. I’ll shoot you a pm. Thanks

#368 54 days ago

Looking for EM parts and/or assemblies. Let me know what you have.

#369 54 days ago
Quoted from LongJohns:

Looking for EM parts and/or assemblies. Let me know what you have.

What do you need?
I have a bally parts head
A full Gottlieb wedgehead minus playfeild for parts.
A genco cab for parts.

#370 51 days ago
Quoted from Mitch:

What do you need?
I have a bally parts head
A full Gottlieb wedgehead minus playfeild for parts.
A genco cab for parts.

I need the metal door for the head on a '77 single player Gottlied wedgehead...

#371 51 days ago
Quoted from Fytr:

I need the metal door for the head on a '77 single player Gottlied wedgehead...

That I dont have.

#372 51 days ago

Anyone have a manual for a Sega Maverick?

#373 49 days ago

Anyone know cheapest spot to order Stern service rails?

#374 48 days ago

I'm selling an almost complete set of used Space Shuttle plastics, missing the small one at the left side of the entrance to the main ramp.

They are used so they have some blemishes and one has a crack

$100 shipped

#375 47 days ago
Quoted from Waynezor:

Anyone know cheapest spot to order Stern service rails?

I got sets from pinball life. Definitely not cheap, no where else I know to get them

#376 47 days ago
Quoted from Boat:

I got sets from pinball life. Definitely not cheap, no where else I know to get them

If you have someone or someplace to ship in US, that can make it cheaper/easier

#377 47 days ago

Looking for STTNG plastics if anybody has some for sale.

#378 46 days ago

For those in the Edmonton area, I will be doing a Weebly order. If you need anything from there feel free to hit me up will pull the trigger on the weekend.

https://nvram.weebly.com/

#379 45 days ago

Metallica original run (wood speaker panel with square speakers) graveyard lightning decal. Pick up in Edmonton and its yours. Removed to put on lighted version. Decal is fine, you'll just need something to make it adhere. Also have various late Stern and WMS legs and a couple stern side rails available for sale. Check with me for what you need and if you want measurements or pics.

#380 45 days ago

Anyone got a used-working system 6 driver board?

#381 42 days ago

Selling my Bram Stokers Dracula clear speaker panel plastic. It is required if you are installing a color dmd. $100 CAD

https://classic-arcades.com/shop?olsPage=products%2Fbride-of-pinbot-speaker-panel

#382 40 days ago

I have an LOTR full plastic set. Asking $200 CAD, I will cover shipping.

#383 40 days ago

I'm looking for a translite for an Elvis. Anyone have one available?

#384 40 days ago
Quoted from ballykissfan:

I'm looking for a translite for an Elvis. Anyone have one available?

I have a NOS Playfield for Elvis, in case you are looking...

#385 40 days ago
Quoted from PinsOnly:

I have a NOS Playfield for Elvis, in case you are looking...

Lol. Yes, I seem to remember that...

1 week later
#386 30 days ago

Anyone in Winnipeg or area interested in a Pinshield cover or two? I only need one, and Justin says the International shipping “sweet spot” is three. Please PM me if you’re interested in going in on an order thanks.

https://pinside.com/pinball/forum/topic/introducing-pinshield-the-pinball-glass-and-playfield-protector

#387 25 days ago

Hey does anyone happen to have a nice space shuttle playfield kicking around by chance? I found an example close to me but it’s playfield is blown out.

#388 25 days ago
Quoted from Pinhead306:

Hey does anyone happen to have a nice space shuttle playfield kicking around by chance? I found an example close to me but it’s playfield is blown out.

Hey man, space shuttle has a hardtop I’m sure, I think it was one of the first ones.
Check it out, be a lot less expensive. And people really like them a lot

#389 25 days ago
Quoted from northerndude:

Hey man, space shuttle has a hardtop I’m sure, I think it was one of the first ones.
Check it out, be a lot less expensive. And people really like them a lot

Thanks! I’m going to look into that.

#390 23 days ago

Anyone have a working Williams system 6 driver board kicking around? Want to test the mpu in my trizone......

1 week later
#391 11 days ago

Looking for a Wms/Bally widebody(Superpin) lockdown bar in great shape.

1 week later
#392 3 hours ago

Hi guys, I am looking for a square shaft for the Sega Frankenstein Pinball. The end of the rod where we screw the left arm of Frankie broke while adjusting last night. Marco are out of inventory for that part.

https://www.marcospecialties.com/pinball-parts/530-5151-00

I would also be interested in acquiring the whole plate assembly or even the whole Frankenstein assembly if it is more convenient for the seller.

Cheers,

Chris

Promoted items from the Pinside Marketplace
$ 163.00
Playfield - Toys/Add-ons
The MOD Couple
$ 14.95
Playfield - Toys/Add-ons
ULEKstore
€ 9.95
Playfield - Other
Multigame
$ 29.99
Lighting - Interactive
Lee's Parts
$ 18.95
$ 89.95
Cabinet - Shooter Rods
Super Skill Shot Shop
From: $ 220.00
Playfield - Toys/Add-ons
CzTV Mods
$ 229.99
Lighting - Other
Lighted Pinball Mods
From: $ 1.00
$ 19.95
$ 5.00
Playfield - Decals
Doc's Pinball Shop
$ 139.00
Playfield - Toys/Add-ons
Sparky Pinball
$ 159.00
Cabinet - Other
Pinball Pimp
$ 194.99
Lighting - Led
PinballBulbs
$ 84.95
Cabinet - Shooter Rods
Super Skill Shot Shop
£ 50.00
Cabinet - Decals
Sillyoldelf Mods
$ 74.00
Cabinet - Armor And Blades
Id Rather Play Pinball
From: $ 9.99
Eproms
Matt's Basement Arcade
$ 74.00
Cabinet - Armor And Blades
Id Rather Play Pinball
From: $ 9.99
Eproms
Matt's Basement Arcade
$ 149.00
$ 24.95
Playfield - Toys/Add-ons
pinballmod
$ 279.95
Cabinet - Toppers
COINTAKER.COM
There are 392 posts in this topic. You are on page 8 of 8.

Hey there! Got a moment?

Great to see you're enjoying Pinside! Did you know Pinside is able to run thanks to donations from our visitors? Please donate to Pinside, support the site and get anext to your username to show for it! Donate to Pinside