Photo: robin
  1. » Forum
  2. » Market
  3. » Regional for sale threads
  4. » Canada pinball parts WTB/LTS official thread.
(Topic ID: 184076)

Canada pinball parts WTB/LTS official thread.

By puck

7 years ago


Topic Heartbeat

Topic Stats

  • 983 posts
  • 147 Pinsiders participating
  • Latest reply 4 days ago by bleargh
  • Topic is favorited by 129 Pinsiders

You

1234567... 20
There are 983 posts in this topic. You are on page 3 of 20.
0
0
0
#101 5 years ago
 
TER

SUPERBEE

Inactive member

CA Newmarket, ON

10y 74,650 3,469 6 6

I recently did a playfield swap on my Getaway and looking to sell the original. I really didnt need a new playfield but did a full on restore of the pin and decided i wanted a new one to put it over the top and the original is in rather good shape for an old playfield. Typical ball trails and slight (very slight) insert lifting but no real wear except for where the supercharger ramp flap sits which is typical. This playfield would be a fairly easy restore if some wanted to and then clear or if you have blown out playfield you could actually just swap.
Looking for $300.00. Would much rather sell local and not ship. PM me or Text me at 416-992-7442 if interested. I dont want to post on the marketplace as i want to sell local but i will certainly donate the appropriate funds to pinside if it sells here. Willing to bring to Allentown If that works. This is Canadian funds. $250.00 American funds. Pinside wont let me add photos on a for sale site but can provide photos when needed.

0
0
0
#102 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

A few posts back I listed some stuff I’ll be selling around the yegpin timing. Bump!

https://pinside.com/pinball/forum/topic/canada-pinball-parts-wtblts-official-thread/page/2#post-4333063

2 weeks later
0
0
0
#103 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Need a wedge head back plate for King Pin

0
0
0
#104 5 years ago
 
WOZ

woz

Pinside member

14y 77,050 1,866

OP
Quoted from puck:

Need a wedge head back plate for King Pin

I had one made at a local sheet metal shop for about $60CAD

0
0
0
#105 5 years ago
 
JAY

dirkdiggler

Inactive member

8y 123K 5,675 2

Anyone have a spare topper for Pinbot?

0
0
0
#106 5 years ago
 
KWF

Fytr

Pinside member

11y 101K 3,407 8

OP
Quoted from puck:

Need a wedge head back plate for King Pin

You can get them from PBR as well for more $. If you decide to go that way let me know I need a few EM flipper buttons and such that don't really make sense to order on their own.

0
1
1
#107 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Free
Williams coin door 1/10 condition

0
1
1
#108 5 years ago
 
RAW

Indusguys

Pinside member

7y 66,900 968 20 18

Does anyone have any spare Mosfet IRL540's they would be willing to ship me?

0
1
1
#109 5 years ago
 
AL

algrande

Pinside member

CA Calgary, AB

12y 70,550 562 15

Digi-Key, $8 over night shipping

Quoted from Indusguys:

Does anyone have any spare Mosfet IRL540's they would be willing to ship me?

0
0
0
#110 5 years ago
 
RAW

Indusguys

Pinside member

7y 66,900 968 20 18

Weird I just checked and it said they were back ordered.

0
0
0
#111 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Anyone need a powered sub? Got two I am selling cheep 25% of what I paid anyways. Great for pins!

0
0
0
#112 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

OP
Quoted from puck:

Anyone need a powered sub? Got two I am selling cheep 25% of what I paid anyways. Great for pins!

Gone!

0
0
0
#113 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Williams power driver board from a T2 on kijiji. Would love this to find a good home.

0
0
0
#114 5 years ago
 
KID

blowback1976

Pinside member

10y 99,050 1,338 7 40 1

On the lookout for a Stern 4-bank target frame. Specific frame was used in Family Guy, Shrek, and World Poker Tour.

0
2
2
#115 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

OP
Quoted from puck:

Williams power driver board from a T2 on kijiji. Would love this to find a good home.

Gone thanks pingod

1 month later
0
0
0
#116 5 years ago
 
WIL

Willathrilla

Pinside member

CA Winnipeg, MB

10y 87,550 333 22 50

I've got a Fathom reproduction backglass, plastics and CPR bronze playfield $1,500 cdn. Selling as a package only.

0
0
0
#117 5 years ago
 
CCR

jesperpark

Pinside member

CA Edmonton, AB

8y 82,300 909 6 9

Does anyone have an extra Williams power driver board wpc-s they can sell me? Mine on my next generation crapped out and the rotten dog board I bought went back for repairs. I'm tired of having a sttng that I'm not able to play . Pm me if you have one

Thanks

0
0
0
#118 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

I have various capcom mechs/coils, which are fairly interchangeable for their games. Also breakshot power/driver board, and I believe a pinball magic possibly airborne power board as well. Also a capcom sound board. Willing to ship wherever. PM me.

Added over 6 years ago:

everything is gone

Post last edited 5 years ago.

0
0
0
#119 5 years ago
 
DTY

libtech

Pinside member

12y 82,650 1,958 42

Anyone have a data east lockbar to sell/trade? I have a few williams ones if interested..

Added over 6 years ago:

Found!

Post last edited 5 years ago.

2 weeks later
0
1
1
#120 5 years ago
 
DTY

libtech

Pinside member

12y 82,650 1,958 42

Anyone have some iron man parts? I could use a right ramp, and the right lane guide plastic (the J shaped one next to the right flipper)

0
1
1
#121 5 years ago
 
???

Tinnhound

Pinside member

CA Medicine Hat, AB

9y 37,550 133 57

I am looking for a CPR Gold Cyclone playfield. If you know of one, please let me know, Thanks!

0
0
0
#122 5 years ago
 
SFV

Hammerhead

Pinside member

CA Melbourne, ON

12y 109K 2,774 15 18 1

I'm looking for the fighter plane mounting bracket for IJTPA. Does anyone have one floating around?

0
0
0
#123 5 years ago
 
CAM

Cam

Pinside member

CA Edmonton, AB

12y 50,300 367 20

Quoted from Tinnhound:

I am looking for a CPR Gold Cyclone playfield. If you know of one, please let me know, Thanks!

I have a new old stock Cyclone pf I can consider selling

0
0
0
#124 5 years ago
 
???

Tinnhound

Pinside member

CA Medicine Hat, AB

9y 37,550 133 57

Quoted from Cam:

I have a new old stock Cyclone pf I can consider selling

pm sent

1 week later
0
1
1
#125 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

Selling for a friend: low voltage Stern DMD pulled from a got pro. Pm if interested.

1 week later
0
1
1
#126 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

Anyone have a whitestar/sam LED OCD they want to sell?

0
0
0
#127 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Quoted from Boat:

Anyone have a whitestar/sam LED OCD they want to sell?

+1 I need one of these as well.

1 week later
0
0
0
#128 5 years ago
 
TIM

Twilight1

Inactive member

CA Warman, SK

10y 80,050 1,227 4

I have some parts for sell. I’m a little busy tonight. But will get back to everyone ASAP.
-New Motor controller board a-16120
-New motor EMI board assembly a-15542
-New trough opto trans board 4-ball Williams a-18617-1
-New trough opto recvr board wpc Williams a-18618-GLM
-New wpc power fix daughterboard
www.kahr.us
-New 10 pc lamp socket- twist wedge 906 24-8803
-New tz mini pf switch and bracket
A-16416-1 I have 2 new and 2 used
-3 new target switch oblong yellow
A-18530-6R
-New target ablong yellow a-20014-6
-New lane guide 1 3/4 yellow transparent 03-8318-16
-New mini Flipper & shaft gray
515-6315-14
-2 new nvram for wpc can't remember were I got them from
-new nos taxi ramp
-New never used but was damaged on arrival Tz clock board by ingo 2013 rev. 1.8 sold as used and not working
-Used tz original clock board
-4 used eddy sensor boards
A-18543-1
-2 used TZ power ball sensor boards a-16528
-2 used opto board set receiver and trans 502-5008-00
-used tz door feature display board
A-16327-GLM

0
0
0
#129 5 years ago
 
DAN

DW3000

Inactive member

CA Saskatoon, SK

6y 27,400 66 1

That A-18530-6R is the reinforced yellow oblong target/slot machine target? I’d be interested in one.

3 weeks later
0
0
0
#130 5 years ago
 
WTF

fast_in_muskoka

Pinside+ Frequent

CA Muskoka, ON

10y 77,800 1,299 2

0
0
0
#131 5 years ago
 
KAR

northerndude

Pinside+ Frequent

7y 112K 4,759 21

Hey fellow CDN’ers

Anyone have two spare aftermarket Williams cabinet leg bolt plates that I can buy?

https://www.marcospecialties.com/pinball-parts/01-11400-1

0
0
0
#132 5 years ago
 
KWF

Fytr

Pinside member

11y 101K 3,407 8

Does anyone have a couple of spare flipper buttons for 1977 Williams EM?

Also need the plastic top part of a rollover switch for the same game.

Thx.

0
0
0
#133 5 years ago
 
SEL

jedi42

Pinside member

CA Cornwall, PE

9y 45,300 401 6 25

Anyone from Canada buy a Pinsound board lately, if so what is the best place to buy for us Canucks? Straight from Pinsound? Anyone in Canada sell them?

0
0
0
#134 5 years ago
 
KAR

northerndude

Pinside+ Frequent

7y 112K 4,759 21

Quoted from jedi42:

Anyone from Canada buy a Pinsound board lately, if so what is the best place to buy for us Canucks? Straight from Pinsound? Anyone in Canada sell them?

Maybe Nitro?

0
0
0
#135 5 years ago
 
LUC

luch

Pinside+ Frequent

CA Newmarket, ON

11y 109K 3,559 74

Quoted from Fytr:

Does anyone have a couple of spare flipper buttons for 1977 Williams EM?
Also need the plastic top part of a rollover switch for the same game.
Thx.

i have some

0
0
0
#136 5 years ago
 
???

HighVoltage

DMCS Pinball

8y 92,550 3,488

I will have a booth at the Abbotsford Tradex this weekend at the MCC Festival for World Relief. Last year I bumped into some pinheads checking out the flee market, so I thought I'd bring some pinball parts this time.

LEDs 0.50/each: mostly Comet warm and cool whites, clear and frosted lenses, some colored SuperFlux lens.

Cabinet button guards: $6 / set

Plastic Promotion / Key Fobs: $5 / each

6.5" Woofer $20 : drop in replacement for Williams and Data East machines, high sensitivity 96db for great response and bass.

NGG manual $15

Carbon Steel Shiny Pinballs $2/ea or $8 for 5

Mylar pieces 0.25 - $1.00 : great to make your own protection for drops, rollover switches, plunger lane, high wear areas

abbotsford.craigslist.ca link

0
0
0
#137 5 years ago
 
KAR

northerndude

Pinside+ Frequent

7y 112K 4,759 21

WANTED - System 11c MPU in good working condition.

0
0
0
#138 5 years ago
 
???

HighVoltage

DMCS Pinball

8y 92,550 3,488

I will also have some Ninja Chrome ultra shiny balls. Heading out now, come by and say hello!

Quoted from HighVoltage:

I will have a booth at the Abbotsford Tradex this weekend at the MCC Festival for World Relief. Last year I bumped into some pinheads checking out the flee market, so I thought I'd bring some pinball parts this time.

0
0
0
#139 5 years ago
 
GT.

Stretch7

Pinside member

CA Leduc, AB

11y 75,600 1,512 94

Looking for WPC transformer and fishtales gun assembly and speaker panel.

0
0
0
#140 5 years ago
 
KAR

northerndude

Pinside+ Frequent

7y 112K 4,759 21

Quoted from Stretch7:

Looking for WPC transformer and fishtales gun assembly and speaker panel.

The gun is basically unobtanium. You can buy one side only from Marco, I’d try sniffing around guys sites that repaint or rechrome them, but they usually only do it with a swap only.

0
0
0
#141 5 years ago
 
GT.

Stretch7

Pinside member

CA Leduc, AB

11y 75,600 1,512 94

Ya i noticed looking around everyone only seems to have the one side. that was my next step to reach out to one of the plating guys and see if they will just sell gun.

0
0
0
#142 5 years ago
 
BRA

brad808

Pinside member

CA Brantford, ON

10y 40,550 389 7 11

Looking for LOTR Translite

0
0
0
#143 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

Anyone have a WPC color dmd power adapter?

0
0
0
#144 5 years ago
 
TFS

tominator

Pinside member

CA Ottawa, ON

7y 44,300 352 7

Looking to buy a playfield protector for fire power. Where is the best place to order from if shipping to Canada?
Can any canucks tell me what their all-in price was after ordering, including taxes, shipping and duties?
Trying to figure out the final price for one...thanks!

0
0
0
#145 5 years ago
 
SEL

jedi42

Pinside member

CA Cornwall, PE

9y 45,300 401 6 25

I ordered one for firepower a couple of years back from Germany. Total cost was easy to work out, convert their shipped $US price to Cdn, and add GST on total when they deliver it. Watch for deals from them in their newsletter, sometimes they have discounts.

Quoted from tominator:

Looking to buy a playfield protector for fire power. Where is the best place to order from if shipping to Canada?
Can any canucks tell me what their all-in price was after ordering, including taxes, shipping and duties?
Trying to figure out the final price for one...thanks!

0
0
0
#146 5 years ago
 
GBH

gregh

Pinside member

CA Halifax, NS

8y 41,900 303 6

I ordered one for a gorgar this year. It was 212$cdn landed. Might be a little more or less now depending on the euro exchange.

3 weeks later
0
0
0
#147 5 years ago
 
PPD

Boat

CPRepair

CA Calgary, AB

7y 107K 1,467 4 92 1

looking for a local sheet of invisglass/pdi for a wide body. TBatti want to re-sell me my old sheet? lol

0
0
0
#148 5 years ago
 
BAT

TBatti

Pinside member

8y 50,800 662 7 40

Quoted from Boat:

looking for a local sheet of invisglass/pdi for a wide body. tbatti want to re-sell me my old sheet? lol

trying convince my kid to sell my ST TNG with the invisglass lol

0
0
0
#149 5 years ago
 
WIL

Willathrilla

Pinside member

CA Winnipeg, MB

10y 87,550 333 22 50

Anybody have a set of legs for a classic stern machine?

0
0
0
#150 5 years ago
OP
 
JFP

puck

Pinside member

11y 75,800 975 7

Looking for a Williams CPU board (Williams WPC Security (WPC-S)) for a JM have ROMs. Working preferably but will take project boards.

1234567... 20
There are 983 posts in this topic. You are on page 3 of 20.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!

This page was printed from https://pinside.com/pinball/forum/topic/canada-pinball-parts-wtblts-official-thread/page/3 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.