(Topic ID: 184076)

Canada pinball parts WTB/LTS official thread.

By puck

5 years ago


Topic Heartbeat

Topic Stats

  • 822 posts
  • 132 Pinsiders participating
  • Latest reply 3 days ago by aeonblack
  • Topic is favorited by 115 Pinsiders

You

There are 822 posts in this topic. You are on page 17 of 17.
#801 85 days ago

Wow, that looks like quite the haul for the buyer who wants (and is able to go) through all those!

#802 85 days ago

Speaking of WCS I have the small white operators handbook in very clean condition if anyone needs it. I don't own this game with no plans to get one.

#803 85 days ago
Quoted from BC_Gambit:

Wow, that looks like quite the haul for the buyer who wants (and is able to go) through all those!

I’d love the jr Pac man but no way to get it to Ontario

2 weeks later
#804 71 days ago

Hello I’m looking for an mpu board for a cheetah. It has an alltek at the moment but I’m looking for a board I can put the tournament code in. Thanks very much.

#805 71 days ago

Anyone have a Capt Fantastic playfield sitting around?

#806 71 days ago

Also looking for a cheetah playfield if anyone has one around. Cheers

#807 71 days ago
Quoted from Pinhead306:

Hello I’m looking for an mpu board for a cheetah. It has an alltek at the moment but I’m looking for a board I can put the tournament code in. Thanks very much.

You can also look at the weebly mpu board that will let you run a custom rom in as well.

#808 71 days ago
Quoted from Hammerhead:

I’d love the jr Pac man but no way to get it to Ontario

How much did Jr Pac sell for?

#809 71 days ago

Got some used WCS parts available if anyone's interested:

mini playfield 36-50031-1
goalie unit assembly, untested A-17741
ball arch A-13204-50031
soccer ball base A-17568
shooter rod 20-9927-1
plastics, some doubles, not a complete set
faceted posts
Bally/Williams ball trough A-16809

1 week later
#811 62 days ago

I've been mulling one of these for a while, but I think the landing for my basement stairs might still be too tight to use one. What's the measurement from the back of the wheels to where the machine rests up against it?

#812 62 days ago
Quoted from aeonblack:

I've been mulling one of these for a while, but I think the landing for my basement stairs might still be too tight to use one. What's the measurement from the back of the wheels to where the machine rests up against it?

It’s pretty slim. The wheels are 6 inches so overall thickness is 7-8. I’ll do an exact measurement later.

I just sold it to a fellow pinsider however!

#813 60 days ago
Quoted from websherpa:

Anyone who has upgraded their The Shadow pinball translite and speaker panel have a spare nice quality speaker panel? I am restoring my Shadow (after parking it for half a decade, lol) and the speaker panel has a great long gouge out of it. And YES I am looking for the original art. lol.
Thanks in advance!

I have one.

#814 60 days ago

If anyone would happen to have a Comet upper metal bracket (ball gate assembly A-10744), please let me know. Mine is quite bent.

#815 60 days ago

Early Bally & Stern electronic pins are my specialty for repairs & new playfield installs. I have worked on hundreds of them for over 25+ years, & continue to work on very old to the newest pinball machines. Also the other local tech does powder coating, cabinet painting, repairs, etc. We are local to Classic Playfield Reproductions for your restoration needs. So if you are in Canada, & searching for other shops for repair or restoration work. Reach out to us if you can ship your pins or parts in for service. I also order new tempered glass from the manufacturer to upgrade games, & you could get extra when your game ships. Depot to Depot is cheapest, but you can get lift gate on your end if you need it!

#816 58 days ago

Hey folks.

I have a System 11 transformer pulled from a PinBot - part# 5610-10897-00
Presumed working but untested. $100 .
PM for pic/info

1 week later
#817 52 days ago

Anyone have a random Bally head laying around? Was contacted with a headless Bally eight ball.
Cheers

#818 48 days ago

Doing some spring cleaning, have the following for sale:

-a bunch of Williams coils, if you're interested or looking for something in particular let me know, but I have a couple dozen or so, all new or NOS. I think everything in here was for Judge Dredd or TOTAN, so should fit a lot of games, but there might be a couple from System 11, ask if you're looking for something for that.
-3 sheets standard glass, all like new condition
-1 sheet standard glass, a little worn but not bad
-1 sheet b/w widebody, some scratches but overall not terrible
-4 dmd's, 3 various era stern and 1 90's b/w
-1 color dmd, I THINK THE DRIVER IS BROKEN, but, the screen should be okay.
-1 cointaker LED backbox lighting kit for GOT Prem (though you could use it on anything, it just has some lighting cues tied to that specific artwork)
-1 pair black stern siderails, like new (they are the factory rails from GOT, so they should fit anything from modern era stern)

I also have some odds and ends like a few misc LED's and a bunch of new balls if you need a handful of misc stuff.

3 weeks later
#819 25 days ago

Looking for Hokus Pokus and Jungle Princess backglass if anyone has one?

2 weeks later
#820 5 days ago
Quoted from Pinhead306:

Hello I’m looking for an mpu board for a cheetah. It has an alltek at the moment but I’m looking for a board I can put the tournament code in. Thanks very much.

I can update the Alltek code for Cheetah if you have the code you want to use to replace the original.
My shop is also a distributor of Alltek boards and have been so since the early 00s.
I also can replace code with Bally/Stern compatible games not listed on Dave’s list.
It isn’t free though…
John :-#)#

#821 5 days ago
Quoted from Stretch7:

Looking for Hokus Pokus and Jungle Princess backglass if anyone has one?

Jungle princess has been found just looking for a Hokus Pokus now

#822 3 days ago
Quoted from aeonblack:

Doing some spring cleaning, have the following for sale:
-a bunch of Williams coils, if you're interested or looking for something in particular let me know, but I have a couple dozen or so, all new or NOS. I think everything in here was for Judge Dredd or TOTAN, so should fit a lot of games, but there might be a couple from System 11, ask if you're looking for something for that.
-3 sheets standard glass, all like new condition
-1 sheet standard glass, a little worn but not bad
-1 sheet b/w widebody, some scratches but overall not terrible
-4 dmd's, 3 various era stern and 1 90's b/w
-1 color dmd, I THINK THE DRIVER IS BROKEN, but, the screen should be okay.
-1 cointaker LED backbox lighting kit for GOT Prem (though you could use it on anything, it just has some lighting cues tied to that specific artwork)
-1 pair black stern siderails, like new (they are the factory rails from GOT, so they should fit anything from modern era stern)
I also have some odds and ends like a few misc LED's and a bunch of new balls if you need a handful of misc stuff.

Bump on this. To add, these are the coils I have. All but the 5 noted are NOS coils:

(3) fl-11629
(1) fl-11630
(1) fl-11753
(5) ae-23-800
(2) ae-25-1000 (+5 used ae-25-1000)
(6) ae-26-1200
(1) ae-26-1400
(2) ae-26-1500
(6) ae-27-1200

There are 822 posts in this topic. You are on page 17 of 17.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, become a Pinside+ member!