(Topic ID: 184076)

Canada pinball parts WTB/LTS official thread.

By puck

5 years ago


Topic Heartbeat

Topic Stats

  • 833 posts
  • 132 Pinsiders participating
  • Latest reply 8 days ago by Tinnhound
  • Topic is favorited by 115 Pinsiders

You

There are 833 posts in this topic. You are on page 16 of 17.
#751 1 year ago
Quoted from aFineMoose:

Anybody around Vancouver have a couple sheets of invisi-glass (or some variation) / insight?
Mainly because I want to put a bunch of Xmas lights on my ceiling to give my rec room a cool atmosphere.

We should have more in stock end of month @ Nitro. We're not too far from you.

Quoted from aFineMoose:

Are you getting Stern HD and/or Voodoo in standard sizes and do they fit both Stern & B/W? Thanks!

We'll have both Voodoo & Stern HD Standard size and Voodoo HD Widebody

#752 1 year ago

I'm looking for standard size glass. I'm located in southwestern Ontario.

#753 1 year ago
Quoted from pinfarmer:

I'm looking for standard size glass. I'm located in southwestern Ontario.

do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass

#754 1 year ago

Speaking of regular pinball glass, does anyone have a standard sized, or wide body sheet in decent that is sitting around in Edmonton? Sure I could order some across the street from my work, but always like to reuse first

#755 1 year ago

Does anyone has a spare spike system 2 power supply I could purchase? If so just inbox me. Thanks in advanced.

#756 1 year ago
Quoted from luch:

do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass

I may take one, assuming no mark-up from Dino's price

#757 1 year ago
Quoted from pinballjah:

I may take one, assuming no mark-up from Dino's price

yes same price , luch approved !

#758 1 year ago
Quoted from luch:

do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass

I. Actually going to be in Toronto this weekend but I'll have a car full of people... Thanks for the offer!

#759 1 year ago

Anyone have a tested, known working wpc 89 MPU board they would sell?

#760 1 year ago

Searching for Phantom Of The Opera Parts! Mostly the main ramp in any condition better then mine! It has warped and I don’t think I’ll be able to save it!

Someone MUST have a decent POTO main ramp available. Located in chilliwack BC.

1 month later
#761 11 months ago

Anyone happen to have a display for a gottlieb solar ride system 1 I think or possibly a nice backglass?
Cheers

1 week later
#762 10 months ago

Several items for sale, all listed in CDN, shipping not included.

- TMNT Topper $1100 ($850US)
Like new, sold machine. Will ship in topper box with manual.

- Stern red LED DMD $120 or 3 for $300
All pulled from HUO machines. 520-5052-15 and include red plexiglass and power cord.

- Stern Star Trek promo plastics and stickers $15

- Williams Star Trek Promo plastics and sticker
$10

- Stranger Things Dice Plunger $30
Made by Mezel Mods. EUC, just replaced with light up version.

- Original Williams shot maps for Jack*Bot, No Fear, and door poster for Revenge from Mars. $60

Pics available. Most of these are listed in Marketplace.

#763 10 months ago

11 system 11a displays for sale. Some work others don’t $150 plus shipping
Bag of pinbot plastics $75 plus shipping

1 week later
#764 10 months ago

WPC89 MPU board with $100 new old stock ASIC chip freshly installed and tested. Nvram, Dip switch configurable for the various WPC titles. PINLED made in Germany. $300 plus shipping. Trades for shaker motors, pinsound stuff, color dmd etc.

4 weeks later
#765 9 months ago

Looking for the following for a Gottlieb Hollywood Heat

Translite
Plastics (any, or all)
Maybe a ramp as well

Any scans of these would be helpful too

Might be interested in other game specific or Gottlieb parts if you have some laying around
MThanks!

#766 9 months ago
Quoted from mad_carl:

Looking for the following for a Gottlieb Hollywood Heat
Translite
Plastics (any, or all)
Maybe a ramp as well
Any scans of these would be helpful too
Might be interested in other game specific or Gottlieb parts if you have some laying around
MThanks!

New ramp available here......https://pinside.com/pinball/forum/topic/ramp-o-matic-ramp-thread

2 weeks later
#767 8 months ago

Looking for some NVRAM for TSPP.

#768 8 months ago
Quoted from schwarz:

Looking for some NVRAM for TSPP.

Does Astill have that? there's a sale right now

https://www.pinballrom.com/nvram

In canada

#769 8 months ago

Out of stock

#770 8 months ago

Which one you need? I may have a spare in my stash I can check. I always bought more than needed when making orders as it's hell for shipping to get more.

#771 8 months ago

The white star 6264.

#772 8 months ago

Shot a in the dark but does anyone have a Gottlieb relay coil #A-19508 in their bin of parts?

https://www.marcospecialties.com/pinball-parts/A-19508

Or maybe a stern as they look similar

Stern Relay Coil 090-5060-01-ND

#773 8 months ago

Found, thanks

#774 8 months ago

For those collectors in the Edmonton area Arkadium Retro Arcade now carries Titan pinball rubbers. To start we have 5 colours available in Black, Blue, Clear, Orange and Red. 3 inch rubber and down. We will add to our colours and selections if this is something that collectors in the area are interested in us carrying. Again we do not have an online store but do have the means to ship to areas in Alberta and Saskatchewan for those needing some.

#775 8 months ago

Go Arkadium...
Nice job !7

#776 8 months ago

looking for a WATERFALL SUPPORT FOR WHITE WATER (03-8745)

https://www.icloud.com/sharedalbum/#B0g5NI45MSvejI

1 week later
#777 8 months ago

Anybody have a spare color DMD power cord for a Stern SAM?

Thanks

2 weeks later
#778 7 months ago

Does anyone near Calgary or Okotoks have a spare H95 key I could borrow and copy or even buy? Any help is greatly appreciated!

Happy New Years!

3 weeks later
#779 6 months ago

Anyone who has upgraded their The Shadow pinball translite and speaker panel have a spare nice quality speaker panel? I am restoring my Shadow (after parking it for half a decade, lol) and the speaker panel has a great long gouge out of it. And YES I am looking for the original art. lol.

Thanks in advance!

1 week later
#780 6 months ago

Seeking a playfield plastic for Data East Jurassic Park. It's the piece that goes behind the Control Room scoop. Please DM if you have one to sell. I can show you a pic of the piece (can't upload pics in this particular forum).

1 week later
#781 6 months ago

Looking for a stern 5v display.

Will either buy or trade for my stern sam display

#782 6 months ago
Quoted from Boat:

Looking for a stern 5v display.
Will either buy or trade for my stern sam display

i have one out of an Iron man , will that work ?

#783 6 months ago

Could use a some Judge Dredd things
- couple of plastics, Sniper tower and plastic under the reactors
- Deadworld mod ring in orange. Would take the eprom too if it was handy, otherwise I’ll burn my own
- 3D crane toy
- reactor toys

#784 6 months ago
Quoted from luch:

i have one out of an Iron man , will that work ?

It would. However found one local from Scott so I should be good!

#785 6 months ago

Hi i have NVRAM back in stock. 5101 , 6116 and 6264 . Supply is limited and prices have increased due to the chip shortage. Go to pinballrom.com or message me through pinside. $27 Canadian per unit including the 5101 which is $40 u.s. at Marcos.

3 weeks later
#789 5 months ago

Looking for a mpu board- 1978 GamePlan Foxy Lady.

#790 5 months ago

I have a fishtales apron in good condition.

#791 4 months ago

I have two stern sam dmd displays

Asking $120 each. Both like new condition

Shipping is no problem

#792 4 months ago

I also have a brand new wpc asic

https://www.marcospecialties.com/pinball-parts/5410-12426-01

$100 Canadian.

#793 4 months ago
Quoted from Boat:

I have two stern sam dmd displays
Asking $120 each. Both like new condition
Shipping is no problem

fire sale .... what's going on with you ?
if your not in a hurry will take the ASIC ....

#794 4 months ago
Quoted from transprtr4u:

fire sale .... what's going on with you ?
if your not in a hurry will take the ASIC ....

If I don’t start selling or giving away parts I end up with boxes and boxes of stuff that sits for too long. No rush at all!

#795 4 months ago

Anyone have a Centaur apron and/or shooter gauge? Or even any old Bally?

Rust/missing paint is fine. Going to try and re-stencil

1 week later
#796 4 months ago

Anyone have a set of system 11 legs they would part with? Or possibly one leg if it matched. My Earthshaker project t has a bent leg. Cheers.

#797 4 months ago

Looking to buy an Earthshaker... selling ?

#799 4 months ago
Quoted from Pinhead306:

Anyone have a set of system 11 legs they would part with? Or possibly one leg if it matched. My Earthshaker project t has a bent leg. Cheers.

Where are you located?

#800 4 months ago

I have a WCS apron in good condition

There are 833 posts in this topic. You are on page 16 of 17.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, become a Pinside+ member!