Quoted from aFineMoose:Anybody around Vancouver have a couple sheets of invisi-glass (or some variation) / insight?
Mainly because I want to put a bunch of Xmas lights on my ceiling to give my rec room a cool atmosphere.
We should have more in stock end of month @ Nitro. We're not too far from you.
Quoted from aFineMoose:Are you getting Stern HD and/or Voodoo in standard sizes and do they fit both Stern & B/W? Thanks!
We'll have both Voodoo & Stern HD Standard size and Voodoo HD Widebody
Quoted from pinfarmer:I'm looking for standard size glass. I'm located in southwestern Ontario.
do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass
Speaking of regular pinball glass, does anyone have a standard sized, or wide body sheet in decent that is sitting around in Edmonton? Sure I could order some across the street from my work, but always like to reuse first
Does anyone has a spare spike system 2 power supply I could purchase? If so just inbox me. Thanks in advanced.
Quoted from luch:do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass
I may take one, assuming no mark-up from Dino's price 
Quoted from pinballjah:I may take one, assuming no mark-up from Dino's price
yes same price , luch approved !
Quoted from luch:do you ever make it to the Newmarket area ? i have a few brand new ones , regular glass
I. Actually going to be in Toronto this weekend but I'll have a car full of people... Thanks for the offer!
Anyone happen to have a display for a gottlieb solar ride system 1 I think or possibly a nice backglass?
Cheers
Several items for sale, all listed in CDN, shipping not included.
- TMNT Topper $1100 ($850US)
Like new, sold machine. Will ship in topper box with manual.
- Stern red LED DMD $120 or 3 for $300
All pulled from HUO machines. 520-5052-15 and include red plexiglass and power cord.
- Stern Star Trek promo plastics and stickers $15
- Williams Star Trek Promo plastics and sticker
$10
- Stranger Things Dice Plunger $30
Made by Mezel Mods. EUC, just replaced with light up version.
- Original Williams shot maps for Jack*Bot, No Fear, and door poster for Revenge from Mars. $60
Pics available. Most of these are listed in Marketplace.
WPC89 MPU board with $100 new old stock ASIC chip freshly installed and tested. Nvram, Dip switch configurable for the various WPC titles. PINLED made in Germany. $300 plus shipping. Trades for shaker motors, pinsound stuff, color dmd etc.
Looking for the following for a Gottlieb Hollywood Heat
Translite
Plastics (any, or all)
Maybe a ramp as well
Any scans of these would be helpful too
Might be interested in other game specific or Gottlieb parts if you have some laying around
MThanks!
Quoted from mad_carl:Looking for the following for a Gottlieb Hollywood Heat
Translite
Plastics (any, or all)
Maybe a ramp as well
Any scans of these would be helpful too
Might be interested in other game specific or Gottlieb parts if you have some laying around
MThanks!
New ramp available here......https://pinside.com/pinball/forum/topic/ramp-o-matic-ramp-thread
Quoted from schwarz:Looking for some NVRAM for TSPP.
Does Astill have that? there's a sale right now
https://www.pinballrom.com/nvram
In canada
Quoted from schwarz:Out of stock
Which one you need? I may have a spare in my stash I can check. I always bought more than needed when making orders as it's hell for shipping to get more.
Shot a in the dark but does anyone have a Gottlieb relay coil #A-19508 in their bin of parts?
https://www.marcospecialties.com/pinball-parts/A-19508
Or maybe a stern as they look similar
Stern Relay Coil 090-5060-01-ND
For those collectors in the Edmonton area Arkadium Retro Arcade now carries Titan pinball rubbers. To start we have 5 colours available in Black, Blue, Clear, Orange and Red. 3 inch rubber and down. We will add to our colours and selections if this is something that collectors in the area are interested in us carrying. Again we do not have an online store but do have the means to ship to areas in Alberta and Saskatchewan for those needing some.
Does anyone near Calgary or Okotoks have a spare H95 key I could borrow and copy or even buy? Any help is greatly appreciated! 
Happy New Years!
Anyone who has upgraded their The Shadow pinball translite and speaker panel have a spare nice quality speaker panel? I am restoring my Shadow (after parking it for half a decade, lol) and the speaker panel has a great long gouge out of it. And YES I am looking for the original art. lol.
Thanks in advance!
Seeking a playfield plastic for Data East Jurassic Park. It's the piece that goes behind the Control Room scoop. Please DM if you have one to sell. I can show you a pic of the piece (can't upload pics in this particular forum).
Quoted from Boat:Looking for a stern 5v display.
Will either buy or trade for my stern sam display
i have one out of an Iron man , will that work ?
Could use a some Judge Dredd things
- couple of plastics, Sniper tower and plastic under the reactors
- Deadworld mod ring in orange. Would take the eprom too if it was handy, otherwise I’ll burn my own
- 3D crane toy
- reactor toys
Hi i have NVRAM back in stock. 5101 , 6116 and 6264 . Supply is limited and prices have increased due to the chip shortage. Go to pinballrom.com or message me through pinside. $27 Canadian per unit including the 5101 which is $40 u.s. at Marcos.
Quoted from Lamonsoff:Could use a some Judge Dredd things
- couple of plastics, Sniper tower and plastic under the reactors
- Deadworld mod ring in orange. Would take the eprom too if it was handy, otherwise I’ll burn my own
- 3D crane toy
- reactor toys
https://pinside.com/pinball/market/shops/1167-gameroom-mods/04276-judge-dredd-deadworld
https://pinside.com/pinball/market/shops/1253-dystopic-pinball/05544-lithophane-planet-mod-judge-dredd
https://pinside.com/pinball/market/shops/1253-dystopic-pinball/03646-lighted-cooling-towers-mod-judge-dredd-
http://www.pinballdecals.com/JD_CraneModUpgradePage.html#
Sniper tower mod is discontinued, but try to find one of these:
https://pinside.com/pinball/forum/topic/interactive-judge-dredd-sniper-tower-mod-development-thread
Quoted from aeonblack:https://pinside.com/pinball/market/shops/1167-gameroom-mods/04276-judge-dredd-deadworld
https://pinside.com/pinball/market/shops/1253-dystopic-pinball/05544-lithophane-planet-mod-judge-dredd
https://pinside.com/pinball/market/shops/1253-dystopic-pinball/03646-lighted-cooling-towers-mod-judge-dredd-
http://www.pinballdecals.com/JD_CraneModUpgradePage.html#
Sniper tower mod is discontinued, but try to find one of these:
https://pinside.com/pinball/forum/topic/interactive-judge-dredd-sniper-tower-mod-development-thread
Thanks @aeonblack, I saw these. Was hoping maybe someone had these lying around unused and unwanted in their drawers of parts.
Quoted from Boat:I have two stern sam dmd displays
Asking $120 each. Both like new condition
Shipping is no problem
Quoted from Boat:I also have a brand new wpc asic
https://www.marcospecialties.com/pinball-parts/5410-12426-01
$100 Canadian.
fire sale .... what's going on with you ?
if your not in a hurry will take the ASIC ....
Quoted from transprtr4u:fire sale .... what's going on with you ?
if your not in a hurry will take the ASIC ....
If I don’t start selling or giving away parts I end up with boxes and boxes of stuff that sits for too long. No rush at all!
Anyone have a Centaur apron and/or shooter gauge? Or even any old Bally?
Rust/missing paint is fine. Going to try and re-stencil
Anyone have a set of system 11 legs they would part with? Or possibly one leg if it matched. My Earthshaker project t has a bent leg. Cheers.
Quoted from Pinhead306:Earthshaker
Looking to buy an Earthshaker... selling ?
Any board repair guys interested.?
https://mcdougallbay.com/bid.php?arg=F6BDD3FB-89AE-4DA8-8CB9-50F8B7EEE08B
Quoted from Pinhead306:Anyone have a set of system 11 legs they would part with? Or possibly one leg if it matched. My Earthshaker project t has a bent leg. Cheers.
Where are you located?
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/canada-pinball-parts-wtblts-official-thread/page/16 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Abbotsford, BC
