You're currently viewing posts by Pinsider jknpa.
Click here to go back to viewing the entire thread.
Verify none of your cabinet tilt switches are engaged. Most likely the 'plumb-bob' sw.( lower left),
if you have one.
Or.......... Relay bank switches mis-adjusted.
***** I disable all my cabinet tilt switches, but that's just me. 
This is what I would do to start...........
1. Put Credits on your Bingo.
2. Un-solder the hot lead from the Tilt coil to disable it ........ troubleshoot that problem later.
3. Forget about the Coin mechanism.........like Dennis said ; or come back to it later.
**** See if you can get to the Start condition and Go from there.
@ I'm sure you will have many other problems, but you might be able to Play a game or two.
You're currently viewing posts by Pinsider jknpa.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/can-not-get-an-old-can-can-to-start-up?tu=jknpa and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Pottsville, PA
