Getaway: High Speed II, The
Williams, 1992I bought an undercab lighting kit for my Getaway from Mezel mods and i am thinking about just cutting the connector and hooking it up directly to the supercharger flasher circuit. Can i do or will it overload the circuit ? I figure it should be ok considering it is leds but there a quite a few and just want to be sure.
You can run under cabinet from your flasher circuit, but if it's RGB LED, you will have to make sure you wire only the color you want and the power. Since I am not familiar with what you bought, I cant say that you can use that. But a normal strip you could do the way I suggested above.
Yes it can as long as you don't get crazy with it. What size and number of leds were you planning on?
Thats no problem. Use the 12v URegV terminal on the driver board for positive power. Negative wire to the black or blue striped wire on the flasher bulb socket listed on page 111 of the manual.
Quoted from CraigC:RGB strip you can run 3 flashers to the strip for each color and only 1ground. I did this real effectively recently on a t2.
I did this using the four section (two on each side under cab) phillips I bought at Costco. Used all three colors tied to different circuits.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/can-i-hook-up-undercab-leds-directly-to-a-flasher-circuit and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
Newmarket, ON
Hillsboro, OR
