I have a similar issue with a High Roller Casino. Was going to get a “hotter” coil if one is available ?
You're currently viewing posts by Pinsider Nikrox2.
Click here to go back to viewing the entire thread.
I have a similar issue with a High Roller Casino. Was going to get a “hotter” coil if one is available ?
So the trough coil is labeled "Stern 09-5023-0T" below that it reads 22-600 (I take it that is the wire gauge and number of turns) which the last number per the link above is supposed to be the equivalent Williams coil (22-600) but when I go to the Williams section there is either a 22-550 or a 23-600...not a 22-600.
Either way - what coil could I get (without taking one apart and eliminating wraps) - to hot rod this a bit to make sure every ball gets up the trough? (It's a pain in the tush during multi-ball because then they just start stacking up...ugh)
BTW- I did add another washer on to the two pronged ejector mechanism that kicks the ball up the trough. There was a lot of play and I had an earlier suggestion to make sure it was aligning properly. SO the switch works, the coil works, and it's aligned - but 1 out of say 10 times (after added said washer) it still isn't making it up the trough. And I've actually lowered the playfield to 5 1/2 - 6 deg...any lower the ball wont roll...lol So it's not too steep.
You're currently viewing posts by Pinsider Nikrox2.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/can-a-coil-be-upgraded-baby-pac-man?tu=Nikrox2 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.