Chris is a great guy. He knows his stuff and is good at what he does.
You're currently viewing posts by Pinsider Swainer80.
Click here to go back to viewing the entire thread.
Quoted from PinballManiac40:Great news it is working again. Hope he got you set up with NVRAM as well.
Did you plug something in wrong originally? Would be nice to know so others can watch out for the same.
I installed NVRAM in my DE Star Trek and the machine bricked (yes the game was off and I made sure the notch was oriented the correct way). Dunno what the hell happened. Put in the old RAM and the game was still dead. . .oh well. It will get figured out, eventually.
Quoted from PinballManiac40:Please start a new repair thread with this issue, please include information about any board work about the MPU or original DE Power Supply that was also done. But also measure the 5volts on the power supply. If it is below 4.8volts, this is likely the issue as the smaller capacitors on the power supply tend to leak. A lot of times, loss of this 5 volts tends to happen about the same time as something else you happen do in the game, just by coincidence.
I'm sure Chris would be happy to look over the pair of boards for you.
Will do.
You're currently viewing posts by Pinsider Swainer80.
Click here to go back to viewing the entire thread.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/call-out-thank-you-for-chris-hibler?tu=Swainer80 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.