I'm in! Picked mine up From Marshall yesterday, #1634 with a 5/04/22 build date. Game played perfect, no adjustments needed. I did add felt tab to the right of Bart as it got stuck there twice, none since. Beautiful machine, could not find one flaw. Marshall is a class act, very knowledgeable and a nice guy, thanks bud. LSOG, Little Shop Of Games in Lutz, Florida.
Loving the machine and the updates, totally satisfied.

So I checked mine after the comment on the metal leg protectors, which mine has from factory and there were 3 cuts in the cabinet art from the legs. I applied felt to the leg and to the metal protector and it moved the leg far enough that they no longer touch the cabinet.
No stains on mine and that's a bummer yours is on the front of the machine.

Not sinking in, they are just too thin.

So, I received my sheriff coins today, bought 20 of them to give away to whoever gets a high score on my CCr. They look much nicer than the crappy cell phone pic shows and are the size of a silver dollar. Love the game, Merry Christmas and Happy New Year to all. Bob

IMG_4742b (resized).jpg

Provident Metals
20 in a tube using credit card was like $70 shipped.
You have to open an account with them, larger distributor. I have been buying from them for a few years.

I mounted 2 spots above the slingshots (see picture) and ran wire to the coin door lights as they are always on. I love how I can see the train moving across now and that beautiful playfield. 12 volt bulbs.

IMG_6664 (resized).JPG

So my train stopped working and after inspecting different things, I came across these loose blue wires under the playfield and it seems to have come from the 4 gang connector above it. Can anyone confirm this for me? Thanks in advance.

zzIMG_9104 (resized).jpg

zzIMG_9110 (resized).jpg

It's not stuck and didn't work in test. As to the blue wires, do they come from that connector?

Thanks bud. I did read that someone else train stopped and was a fuse on board under playfield, my visual inspection it looked good, I'll test that and report back.

Soldered the wires back on and all good there, tested the fuse under playfield and was good. Tried train test again and nothing. Train can be moved by hand and motor will turn by hand, but very tight.

My train quit working (did the usual, test, reseat connectors, check fuses) and CG sent a new motor out and when I went to install it I found out that one wire to the motor was only held on by the shrink wrap. Sent new motor back, appreciate the fast service by CG. Great game.

I put 2 spots in and they work perfect, took the electric from coin door lights, as they are always on. 12V

IMG_6664 (resized).JPG