Quoted from MacGruber:

Update..ACL surgery was successful and this CCr should be back on it's feet in no time. Definitely not hiding this vice scar tho so it's not a solution for LE buyers but I believe the wait is finally over!
[quoted image][quoted image]

Quoted from Pinballer73:

Can it really be that easy? I thought from what others had described in this thread, the newer legs have been pressed/crimped too tightly, resulting in the leg being over bent, which cuts into the cabinet and damaging the decals. Putting the leg in the vice and squeezing would bent it inwards even further wouldn't it? Unless I'm missing something very obvious of course.

Quoted from dog:

We will need to be more patient in Australia. I’ve had 3 pinballs sitting at the port in LA since June waiting for room on a ship, due to chronic backlog. Still Hoping to get loaded next week. CCr won’t make it to AUS this year unless Wayne can pull some strings

Quoted from audihere:

My glass is exactly 21” wide.
Here’s a pic I just took. Disregard the wooden skewer, it’s keeping the glass from falling out of the channel. I added a red line to the pic.
If your cabinet is measuring inside to inside (not including the GIANT chamfer they added on both sides that causing a lot of this trouble) more than just under 20-9/16”, then I would think your glass would fall out too. [quoted image]

Quoted from jokerpoker:

For us patiently waiting in Australia LTG have you heard anything on when international games will ship. Figured I’d ask you as you have an inside track. Thanks and no worries if you haven’t heard.

Quoted from skywalker:

Hang tight boys just landed thanks to all involved, it's been a marathon wait order/deposit 02/12/21.
Fingers X'd for the Euro boys now hopefully not much longer.[quoted image][quoted image]

Quoted from LTG:

Please open a ticket on the CGC website : https://www.chicago-gaming.com/ under Support.
Include this part about your topper. It may go to me. I'll alert it to the engineer so it can be sorted out.
Thank you.
LTG : )

Quoted from MANTO1975:

Finally received my LE last week, after playing the game over the weekend i am having issues that when the ball travels across the train track it hits the top of the ramp and more than not the ball falls of the top of the ramp to the playfield, i had the playfield set to 7 degrees and have now changed it to 6.6 degrees and this is still happening.
Has anyone else had the issue?
does the sensor under the bottom of the ramp need to be activated to gain points of is it just from the inlane rollover switch?
please see videos below.
https://share.icloud.com/photos/01fJLxWmKUO3WiPXNdo6taQ4g
https://share.icloud.com/photos/0bakrF2iPNo_8wM7xNE1Kys8Q
cheers
Trevor

Quoted from Macca101010:

Received my backglass and installed it.
Must say its beautiful, really pops. Photo's don't do it justice.

Quoted from DownSouthPinball:

That’s laughable. They can’t make 1250 LE machines in three years, but don’t worry about it because now they have two lines.