Quoted from beltking:All these se machines going up for sale at msrp from flippers. Think they thought they would make bank.
Usually only the LE version will be a higher price. Then once they stop making the game all together then the price of all the versions will usually go up.
Quoted from AJC3030:Mezel has these posts out now . Pretty nice touch.
Two different mix and match styles to choose from. Very clever.
The gold mine sign and plastic protectors are available too.
And more coming, including train station and rustic train tracks …though Saloon Doors aren’t in the plan
Direct link to their Cactus Canyon mods page in the FAQ.
Quoted from Jon9508:Not bad for free prints.
[quoted image][quoted image]
Those tracks look like they may be easier to see past. A coat of paint would look nice on them
Quoted from NightTrain:Link? Can’t seem to find em.
found the cart https://www.thingiverse.com/thing:2418854
It's here and I'm really impressed as this is my first non Stern. As of late I'm typically a don't play it guy until full Cliffys are installed and washers under the guides but I'm not sure I'm going to hafta do anything to this pin it seemed almost Bullit proof with mylar and factory cliffys. One mess up tho they forgot the power cord I think that happened to someone a couple days ago maybe we had the same day but hey I'll take it Bravo CCG!
20220520_131244 (resized).jpg20220520_174854 (resized).jpg20220520_175248 (resized).jpg20220520_180026 (resized).jpgQuoted from NightTrain:Link? Can’t seem to find em.
https://cults3d.com/en/3d-model/game/train-tracks-for-os-railway-fully-3d-printable-railway-system
Tracks were somewhere else. I only used 2 of the tracks together. Then Used a soldering iron to poke holes in them. And bolted them up.
Quoted from foxtj24:found the cart
Thanks. That may be popular so I’ve added it to the FAQ.
Yeah I’ve seen a medieval madness le with 20k plays and was in great shape other than needed cleaned and new rubbers. Built well. For home use just protect the shooter lane.
Quoted from AJC3030:Mezel has these posts out now . Pretty nice touch
[quoted image][quoted image]
Would look better if printed with resin. Still cool though.
Cc has been staying very clean with the factory rubber on location. Much better than my recent sterns.
Quoted from jfh:Two different mix and match styles to choose from. Very clever.
The gold mine sign and plastic protectors are available too.
And more coming, including train station and rustic train tracks …though Saloon Doors aren’t in the plan
Direct link to their Cactus Canyon mods page in the FAQ.
this is not good for my wallet!! I am ordering IT ALL!!!
Quoted from Atari1977:Just got mine in, #1702
What’s the date of manufacturing?
(Congrats. Good choice for a first NIB game!)
So what has everyone found to be the ideal angle of setup from actual game play, I today went and dropped mine to 6.87 from 7.97 and my scores well more than doubled, not sure yet which was was more appealing. What do you others with machines think?
Also curious if anyone else has noticed any oddities like this, not always but every so often the right bad guy when hit registers as the left bad guy when awarded. Also saving polly from train, the train can be reversing but I can still hit the final shot and save her even though it should have failed, guessing it is just a grace period in the code (a lot of them on my spiderman).
Today first play I made it thru high noon. Thinking I will find an in-between angle to setup too.
hn (resized).jpgQuoted from jfh:What’s the date of manufacturing?
(Congrats. Good choice for a first NIB game!)
May 12th, think my local distributor had gotten in the day before I picked it up. I live like an hour away so I just drove to pick it up, saw a couple others in his outgoing section.
Quoted from sdvoci:I'm a little late joining, I've had my game for a little over a week.... I would be interested in hearing from anyone who has their machine and bought the magnetic speaker panel cover on ebay, on how it fits and looks when installed.[quoted image]
Yours was the day after mine!
79913B4F-5D43-4771-95D6-78708C16DEB1 (resized).jpegI have 6 Spotlight covers are available for immediate shipping. After that they are made to order. Please PM me to order.
Thank you to Cldgin2 for testing and providing the installed pictures!
0A60B540-7B6C-408C-A13B-25ED2458A3A3 (resized).jpeg6F0B0CFD-B30D-44E5-A1DE-C5954B570458 (resized).jpeg8E1E7885-B409-435D-932D-0FA16EF4402C (resized).jpegQuoted from Mrsiyufy:I have 6 Spotlight covers are available for immediate shipping. After that they are made to order. Please PM me to order.
Thank you to Cldgin2 for testing and providing the installed pictures!
[quoted image][quoted image][quoted image]
While I like how the barrel fits in with the world, theme wise.
Having a giant barrel on top of the train station throws off the scale a bit too much for me.
Does anyone happen to know the size of the e-clip for the shooter rod? I was fiddling with the shooter (having issues with the strength of the plunge) and the clip popped off and cannot find it for the life of me. Was going to just order a replacement but not sure what size. https://www.pinballlife.com/e-clips.html
Thanks
Quoted from zephee:Does anyone happen to know the size of the e-clip for the shooter rod?
3/8ths
LTG : )
Quoted from The-Hum:While I like how the barrel fits in with the world, theme wise.
Having a giant barrel on top of the train station throws off the scale a bit too much for me.
I hear ya, but it’s far enough away from the train it actually to me looks really good! Along with my barrel cup holder it’s tied together. I can easily suggest it to anyone.
Has anyone else had it try to load multiple balls into the shooter lane?
It’s happened a few times over the last couple days. I didn’t see any mention in the FAQ yet.
Been playing non stop since i got the game. A blast to play. Can someone tell me what starts the train?
Quoted from billsfanmd:Been playing non stop since i got the game. A blast to play. Can someone tell me what starts the train?
3 shots to the train ramp. I believe.
Quoted from Pinless:Has anyone else had it try to load multiple balls into the shooter lane?
Only 4 balls in the game, ball trough ?
The shooter lane switch working and staying closed when a ball is on it ? ( Tests - Switch Edge )
Balls not magnetized and rolling down the ball trough right ?
Plunger that kicks the ball up to the shooter lane sticking up a tiny bit to high and sticking balls ? ( 4 screws on end of the ball trough can be loosened to move coil bracket up or down. Don't go too high or too low )
LTG : )
After 30 5-ball games all four of the drop targets stopped working. In test mode the lights come on and there is a clicking sound from each target, but they do not pop up. I've read about issues with one or two targets not staying up, but none of mine move at all. I submitted a ticket to CGC. Rest of the game works fine.
Added 22 months ago:New user error, did not know the high voltage switch needs to be pulled out one click to test the solenoids. One drop target would not stay up in game play or test and I fixed it by doing what some others have done: I replaced the factory spring with a Bally-Williams flipper return spring that has a little less tension. Now drop target works fine. Thanks to those that mentioned this could work.
Quoted from The-Hum:While I like how the barrel fits in with the world, theme wise.
Having a giant barrel on top of the train station throws off the scale a bit too much for me.
A UFO mother ship would look good, absolutely nothing to do with the game, unless; cowboys & Aliens mode is incorporated in the LFS code ??? Who knows
Quoted from ClassicHornet:A UFO mother ship would look good, absolutely nothing to do with the game, unless; cowboys & Aliens mode is incorporated in the LFS code ??? Who knows
Ha, if they included the mode, I would look forward to this conversation everytime someone saw the game.
- "Should a UFO be in the wild west?"
- "You'll see"
Quoted from zephee:Does anyone happen to know the size of the e-clip for the shooter rod? I was fiddling with the shooter (having issues with the strength of the plunge) and the clip popped off and cannot find it for the life of me. Was going to just order a replacement but not sure what size. https://www.pinballlife.com/e-clips.html
Thanks
Hardware store dude can buy that standard stuff anywhere
Audio question - so on other CGC games, things seem to be plenty loud and clear for both music and callouts around 8-10 volume - on CCr it sounds a bit muddy/muffled - and needs to be cranked up to about 22-28 to match the volume of other games. Anyone run into this? Normal for this title?
Quoted from ClassicHornet:A UFO mother ship would look good, absolutely nothing to do with the game, unless; cowboys & Aliens mode is incorporated in the LFS code ??? Who knows
Cowboys vs aliens will not be in the LFS code.
Quoted from alveolus:Cowboys vs aliens will not be in the LFS code.
Yup. Confirmed by Josh multiple times. Some elements from CCC will be in the upgrade but nothing that Josh/Lyman didn’t feel fit in the Cactus Canyon world.
Quoted from polishedball:Lermods Undercab lighting kit for MM works on CCr.
Thx. Was just going to post. Here’s a link to our CCR web page for those who might be interested.
https://lermods.com/shop/ols/categories/cactus-canyon-remake-pinball-machine-mods
Quoted from Lermods:Thx. Was just going to post. Here’s a link to our CCR web page for those who might be interested.
https://lermods.com/shop/ols/categories/cactus-canyon-remake-pinball-machine-mods
You have a special kit listed for the CE. There is no CE for Cactus Canyon.
Quoted from jfh:You have a special kit listed for the CE. There is no CE for Cactus Canyon.
Will fix that, we just copied over from mbR. It’s the same kit across all Cgc games for the SE and LE/RE.
Quoted from MadEwokHerd:I'm officially in the club today. S/N #1693 built on May 11. Working great straight out of the box.
[quoted image]
[quoted image]
[quoted image]
Nice! Looks great!
Richard
Quoted from Only_Pinball:Any update on when you will be receiving your game?
We should just print him a sticker …
What is the standard shipping for these delivered in the US? CGC ships directly to the customer right?
Quoted from Brexfast89:What is the standard shipping for these delivered in the US? CGC ships directly to the customer right?
From what I have seen and read
CGC doesn’t drop ship
They ship to the distributor then they ship to the purchaser
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/cactus-canyon-remake-club-new-sheriffs-in-town/page/45?hl=charlemagne1987 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.