(Topic ID: 310125)

Cactus Canyon Remake Club - New Sheriffs in Town! (with FAQs)

By jfh

2 years ago


Topic Heartbeat

Topic Stats

  • 15,395 posts
  • 754 Pinsiders participating
  • Latest reply 13 hours ago by DavisAZ
  • Topic is favorited by 384 Pinsiders

You

Linked Games

Topic poll

“Which version have you ordered and/or received?”

  • Limited Edition [LE] 333 votes
    51%
  • Special Edition with Wild West topper [SE+] 103 votes
    16%
  • Special Edition [SE] 217 votes
    33%

(653 votes)

Topic Gallery

View topic image gallery

IMG_5053 (resized).jpg
IMG_5068 (resized).jpg
Capture (resized).JPG
Screenshot_20240408_083646_Chrome (resized).jpg
Screenshot_20240408_031213_Drive (resized).jpg
AE50EDD5-0A2D-4824-883B-9B097D38C6FF (resized).jpeg
86B25964-BA83-413E-9949-4511DE3D5375 (resized).jpeg
Reward issue switches (resized).jpg
shut-up-and-take-my-money.gif
Screenshot_20240324_221804_Gallery (resized).jpg
IMG_1816 (resized).jpeg
Screenshot_20240324-141652 (resized).png
Screenshot_20240308_213009_Chrome (resized).jpg
EC303592-D7CC-41EA-874F-1A7CEE1ECEA6 (resized).jpeg
IMG_0547 (resized).jpeg
362905216_803394858240474_5250419017402129576_n (resized).jpg

Topic index (key posts)

13 key posts have been marked in this topic, showing the first 10 items. (Show topic index)

There are 15,395 posts in this topic. You are on page 223 of 308.
#11101 1 year ago
Quoted from Teknotoyz:

Picked up a CCr LE # 397 last week.
One thing that irritates me on the shaker is that I like it to just move the pin, not be some jackhammer trapped in a pinball.
Factory settings don't slow it enough for me, if the glass rattles, it's too much.
I have these in both my MMr and CCr now.
CCr multiball still gets the glass rattling, so a very cheap and fast fix was to install a DC motor control (make a simple harness and no cut wires!).
This gives you a dial for the shaker to dial in whatever speed you like!
amazon.com link »[quoted image]

I don't have my LE yet, but I'm with you, not a fan of jackhammer shaking in a pin, especially if the pin is inside the house on the second floor. I'm wondering though if I'm really going to need the motor control box. Isn't there a strength setting in the service menu that will change the frequency of the shaking as well as a physical weight on the shaker that can be shifted to change the violence of the shaking?

#11102 1 year ago
Quoted from Lateralus:

#374 is home. Plays great out of the box, so far. Love this game and FINALLY have one!
Shout out to my buddy, JD! [quoted image][quoted image][quoted image]

Need a stool for the cat, it cant reach the flipper buttons!

#11103 1 year ago
Quoted from CoolCatPinball:

To be fair, my decal experience is with older machines. When I removed the decals from an older Elvira machine it was a major undertaking. Perhaps the decals on a new machine would come off easier? The larger concern is preparing for the new decal. If the surface isn't perfectly smooth and clean, it will definitely show, and very possibly look worse than it was. It sounds like your situation is worse than the scratch on the other gentlemans backbox. In his case a set of Testors model paint, some color mixing, and a touch up would probably go unnoticed by anyone. But, then again, we all have different thresholds as to what we're willing to do for our pins [quoted image]

I had a little ding on my potc head decal when it arrived. I filled the ding and smoothed it perfectly to the old decal. Then I got the new decal and put it exactly over the old one. You can’t tell at all. I believe I did the dry method but I’d probably do wet now just to make sure it’s exact.

15
#11104 1 year ago

#432 has arrived with mirrored back glass. Can’t wait to setup this weekend

3D1CB487-BC3D-4563-9012-DC954AE6D4CF (resized).jpeg3D1CB487-BC3D-4563-9012-DC954AE6D4CF (resized).jpeg5B9E0D99-235A-49F7-ADA2-7FBF5536F5CC (resized).jpeg5B9E0D99-235A-49F7-ADA2-7FBF5536F5CC (resized).jpegA581689A-8106-4C8F-8448-4C69C95668D7 (resized).jpegA581689A-8106-4C8F-8448-4C69C95668D7 (resized).jpeg
#11105 1 year ago
Quoted from ulmpharmd:

We wanted to wait until the morning to release the day 7 mods, but we will be on our way to TPF and didn't want anyone to miss out on seeing our final release of this event, so we hope you enjoy! Also go see the other release threads as we are starting to get some videos out on some of the items (primarily the aprons)[quoted image][quoted image][quoted image]

AWESOME!!

Count me in.

#11106 1 year ago
Quoted from Lateralus:

#374 is home. Plays great out of the box, so far. Love this game and FINALLY have one!
Shout out to my buddy, JD! [quoted image][quoted image][quoted image]

I like the barrel cup holder. Do you have a link or source where you wrangled it?

#11107 1 year ago
Quoted from Golgotha:

I like the barrel cup holder. Do you have a link or source where you wrangled it?

I know that Soulrider911 makes a nice looking one that he posted in the Stern POTC thread. I have one of his mods and it's really nice.

Screenshot 2023-03-23 at 3.01.40 PM (resized).pngScreenshot 2023-03-23 at 3.01.40 PM (resized).png
#11108 1 year ago
Quoted from Paul_from_Gilroy:

I'm wondering though if I'm really going to need the motor control box. Isn't there a strength setting in the service menu that will change the frequency of the shaking as well as a physical weight on the shaker that can be shifted to change the violence of the shaking?

I don’t think CCr is as bad as MMR, either way, wait and see. The motor control is $15, why I like them, but not everyone will want or need to do anything.

#11109 1 year ago
Quoted from Golgotha:

I like the barrel cup holder. Do you have a link or source where you wrangled it?

Details in the FAQ under “Cool cup holder”. I’ll change the name. It looks even better in person.

#11110 1 year ago

I went ahead and ordered that Polly mod from Matt and Back Alley creations. Loving the look of the figure and the blue ramp she sits on kinda gives the impression of a waterfall color to the existing ramp.

That makes a total of 10 mods I have now for CCR + just waiting to be put into my pin. Now if I could only get the pin.

#11111 1 year ago

I was hoping Polly might look more like this…

A791399B-4828-41E2-83DD-D52A490E5019 (resized).pngA791399B-4828-41E2-83DD-D52A490E5019 (resized).png
#11112 1 year ago
Quoted from Teknotoyz:

Is anyone else door OCD?
I sold the Suzo door almost as soon as the machine was out of the box.
Plug and play with the exception of the coin chute lights... 12v vs 5v.
Also, got the original WPC button style back!!
[quoted image][quoted image][quoted image]

I’m “door OCD” in the other direction: Only Suzo-Happ with DBA validator cutouts please! The old WPC’s can’t even use the old Mars 2400 validators without having to dremel-saw through the door.

#11113 1 year ago
Quoted from NicoVolta:

I’m “door OCD” in the other direction: Only Suzo-Happ with DBA validator cutouts please! The old WPC’s can’t even use the old Mars 2400 validators without having to dremel-saw through the door.

Wanna trade an old WPC door and frame for a new Suzo?

11
#11114 1 year ago

I got the "2-3 month estimate" from PPS just under a month ago and have been notified today that my game's ready so that's a nice surprise. Probably the first time CGC was ever ahead of schedule

#11115 1 year ago
Quoted from Indypin:

I went ahead and ordered that Polly mod from Matt and Back Alley creations. Loving the look of the figure and the blue ramp she sits on kinda gives the impression of a waterfall color to the existing ramp.
That makes a total of 10 mods I have now for CCR + just waiting to be put into my pin. Now if I could only get the pin.

Same here, still have to order the ones from Mezel Mods (still debating on the Gold Mine sign as the brown is a little darker than the original sign and my OCD isn’t sure yet) and the magnetic speaker decal. I’m an SE+ so I’m hoping by Christmas but no rush as I know it’ll be worth it.

#11116 1 year ago

Working on a Tavern mug with bullet holes for a Cactus Canyon pin gulp!! Should have a protoype done soon to share with you all

Screenshot 2023-03-24 at 10.30.02 AM (resized).pngScreenshot 2023-03-24 at 10.30.02 AM (resized).png
10
#11117 1 year ago

Installed side art blades from Brian Allen today. Really digging the look.

3F15F98C-2A6E-484D-A155-C1A001FBAD25 (resized).jpeg3F15F98C-2A6E-484D-A155-C1A001FBAD25 (resized).jpeg81B46EC6-56D8-40C1-9141-039C452231CF (resized).jpeg81B46EC6-56D8-40C1-9141-039C452231CF (resized).jpeg
#11118 1 year ago
Quoted from Soulrider911:

Working on a Tavern mug with bullet holes for a Cactus Canyon pin gulp!!

I’ll bet that’ll be awesome!

I’ll add a coming soon entry to the mods section of the FAQ. PM me with any details/ordering info you’d like to include.

#11119 1 year ago

Those Brian Allen blades are really cool…I like them even more than the LE ones.

#11120 1 year ago
Quoted from Golgotha:

I like the barrel cup holder. Do you have a link or source where you wrangled it?

I bought it from Mrsiyufy a long time ago. Very happy with it and wasn't expensive

18
#11121 1 year ago

Got mine delivered, setup and playing today. Everything seems to be working great and having a blast with it.

PXL_20230325_043202228.MP (resized).jpgPXL_20230325_043202228.MP (resized).jpg
#11122 1 year ago
Quoted from bemmett:

Got mine delivered, setup and playing today. Everything seems to be working great and having a blast with it.[quoted image]

Congrats to another Colorado law man!

Number and mfg date?

#11123 1 year ago

315 LE, I'm too tired to pull the game out of my line and look at mfg date.

#11124 1 year ago
Quoted from jfh:

Congrats to another Colorado law man!
Number and mfg date?

So whats your best guess on how many LE's have been delivered? 450 ish?

#11125 1 year ago
Quoted from PtownPin:

So whats your best guess on how many LE's have been delivered? 450 ish?

Mine just arrived this week and it was #435.

#11126 1 year ago
Quoted from PtownPin:

So whats your best guess on how many LE's have been delivered? 450 ish?

Yeah. I got a note about 451 so I updated estimate to 460. But I still don’t know if any of them are built and earmarked for a container. And there are some matching numbers that may be out of sequence. Hoping someone at TPF can get some insight from the CGC guys. I haven’t talked to anyone for a while and have at least another 6 weeks in rehab.

But I’m beginning to think it may be less because there are recent deliveries in low to mid 300s. I did kind of give up because I have way more numbers than mfg dates. Still doesn’t seem to be at what capacity is supposed to be. Seems 35-40 a week recently. Good news is some are getting their invoices weeks earlier than expected so who knows.

Any word on yours?

18
#11127 1 year ago

#381 LE all set up. Plays perfectly right out of the box. Absolute blast!

20230325_114904 (resized).jpg20230325_114904 (resized).jpg
#11128 1 year ago
Quoted from jfh:

Yeah. I got a note about 451 so I updated estimate to 460. But I still don’t know if any of them are built and earmarked for a container. And there are some matching numbers that may be out of sequence. Hoping someone at TPF can get some insight from the CGC guys. I haven’t talked to anyone for a while and have at least another 6 weeks in rehab.

But I’m beginning to think it may be less because there are recent deliveries in low to mid 300s. I did kind of give up because I have way more numbers than mfg dates. Still doesn’t seem to be at what capacity is supposed to be. Seems 35-40 a week recently. Good news is some are getting their invoices weeks earlier than expected so who knows.

1lgjmp.jpg1lgjmp.jpg
#11129 1 year ago

Found a bison skull, matches the image on the backglass pretty close

20230325_124414 (resized).jpg20230325_124414 (resized).jpg20230325_124416 (resized).jpg20230325_124416 (resized).jpg
#11130 1 year ago
Quoted from jfh:

Yeah. I got a note about 451 so I updated estimate to 460. But I still don’t know if any of them are built and earmarked for a container. And there are some matching numbers that may be out of sequence. Hoping someone at TPF can get some insight from the CGC guys. I haven’t talked to anyone for a while and have at least another 6 weeks in rehab.
But I’m beginning to think it may be less because there are recent deliveries in low to mid 300s. I did kind of give up because I have way more numbers than mfg dates. Still doesn’t seem to be at what capacity is supposed to be. Seems 35-40 a week recently. Good news is some are getting their invoices weeks earlier than expected so who knows.
Any word on yours?

Thanks for the intel....I was told June/July timeframe ....

#11131 1 year ago

I ordered original release date with PPS. Hoping much later this year as GTF has my attention.

#11132 1 year ago
Quoted from underlord:

GTF has my attention.

Looks interesting... would love to see actual game play

#11133 1 year ago
Quoted from underlord:

I ordered original release date with PPS. Hoping much later this year as GTF has my attention.

Be cool if you could shuffle slots. Match up who wants it earlier and who wants it later. I think previous LE owners should get their games early like it was with previous releases and flippers get their games absolutely last.

But that’s a pipe dream. I’m just glad games are being delivered at a decent clip.

#11134 1 year ago
Quoted from transprtr4u:

Looks interesting... would love to see actual game play

As all of us. AP done shadoodled it all up.

Twitch stream Tuesday night possibly.

I checked marketplace not one sold through there yet. I wonder how many at TPF are sold…
But I digress. Back to the Wild West.

#11135 1 year ago
Quoted from marioparty34:

I did just that and the vibrations ended up closing the hole again. I will try to open it up and tighten it even more. Maybe I was too gentle with my screwing. (Now that sounds pretty dirty. Lol) Thanks.

Issue is fixed. I adjusted the left side ramp towards the back of the playfield a few mm and it gave the rod enough room to slide up and down easily. Beer mug can easily tap the glass now.

11
#11136 1 year ago

Received my plaque from pinballjah today, looks so much better than that cheap factory one, which peeled off easily with a dental pick. A huge upgrade in that great looking buckle

20230325_163519 (resized).jpg20230325_163519 (resized).jpg20230325_163707 (resized).jpg20230325_163707 (resized).jpg20230325_164850 (resized).jpg20230325_164850 (resized).jpg
12
#11137 1 year ago

Hey Freinds here is a preview of the CC Gulp I am working on. Going to make a few tweaks and then I will start making these. If you are interested please just PM me and in the title have “CC Gulp”. This will be in two parts, the main body and the bracket that will mount it to the legs. The reason for 2 parts is in the case the bracket cracks from over tightening its easy to replace. So in these photos that bracket is not present, just and FYI

Cheers!

0ACD40EE-61AB-4011-A638-BA4C4432CFFF (resized).jpeg0ACD40EE-61AB-4011-A638-BA4C4432CFFF (resized).jpeg567589E4-81FA-4395-A733-E025797EACE5 (resized).jpeg567589E4-81FA-4395-A733-E025797EACE5 (resized).jpeg8B10FCA8-FCD6-4122-A416-8EBD4914BAF5 (resized).jpeg8B10FCA8-FCD6-4122-A416-8EBD4914BAF5 (resized).jpeg8EF4A2BA-D8B0-4F6B-B190-8F80D91E2645 (resized).jpeg8EF4A2BA-D8B0-4F6B-B190-8F80D91E2645 (resized).jpegFDD3C525-E6AB-4B75-B58E-D50C721556D1 (resized).jpegFDD3C525-E6AB-4B75-B58E-D50C721556D1 (resized).jpeg
#11138 1 year ago
Quoted from Soulrider911:

Hey Freinds here is a preview of the CC Gulp I am working on. Going to make a few tweaks and then I will start making these. If you are interested please just PM me and in the title have “CC Gulp”. This will be in two parts, the main body and the bracket that will mount it to the legs. The reason for 2 parts is in the case the bracket cracks from over tightening its easy to replace. So in these photos that bracket is not present, just and FYI
Cheers!
[quoted image][quoted image][quoted image][quoted image][quoted image]

Nice looking cup. Do you know if the light up discs will fit in the bottom of these? I forgot the name of the forum member that makes them.

#11139 1 year ago

Most likely yes they will as the bottom diameter of a standard pin gulp is actually smaller than this.

#11140 1 year ago
Quoted from Soulrider911:

Hey Freinds here is a preview of the CC Gulp I am working on. Going to make a few tweaks and then I will start making these. If you are interested please just PM me and in the title have “CC Gulp”. This will be in two parts, the main body and the bracket that will mount it to the legs. The reason for 2 parts is in the case the bracket cracks from over tightening its easy to replace. So in these photos that bracket is not present, just and FYI
Cheers!
[quoted image][quoted image][quoted image][quoted image][quoted image]

Great job! Printing the bracket with 90-100% infill will really help them last.

#11141 1 year ago
Quoted from Hayfarmer:

Found a bison skull, matches the image on the backglass pretty close
[quoted image][quoted image]

Link?

#11143 1 year ago

I went with the bone, painted option. Was $22, but for a few dollars more, it's still a cheap mod that really looks like it came from the factory.

#11144 1 year ago
Quoted from Hayfarmer:

I went with the bone, painted option. Was $22, but for a few dollars more, it's still a cheap mod that really looks like it came from the factory.

How did you mount it?

#11145 1 year ago
Quoted from jfh:

How did you mount it?

I cut a 1/4" wide piece of tin, bent into a Z shape, dbl back tape, then after mounting, bent to angle I liked best

#11146 1 year ago
Quoted from Hayfarmer:I went with the bone, painted option. Was $22, but for a few dollars more, it's still a cheap mod that really looks like it came from the factory.

It’s really awesome!

#11147 1 year ago
Quoted from Hayfarmer:

I went with the bone, painted option. Was $22, but for a few dollars more, it's still a cheap mod that really looks like it came from the factory.

I went with a smaller scale bone colored. For the same price I got a bag of 5. I like the more subtle size. If anyone only wants one, I will send you one for $5. I only need 2. PM me.

Skulls (resized).jpgSkulls (resized).jpg

#11148 1 year ago
Quoted from Golgotha:

I went with a smaller scale bone colored. For the same price I got a bag of 5. I like the more subtle size. If anyone only wants one, I will send you one for $5. I only need 2. PM me.
[quoted image]

PM sent!

#11149 1 year ago

Is this normal or damaged. Insert looks like messed up inside others don’t look like that or am I over analyzing

8D609DC8-948B-40EE-85DB-558DEA04AE89 (resized).png8D609DC8-948B-40EE-85DB-558DEA04AE89 (resized).pngD8109A00-7FE2-4BDD-8E42-040D2DBF8434 (resized).pngD8109A00-7FE2-4BDD-8E42-040D2DBF8434 (resized).png
#11150 1 year ago
Quoted from moonraker:

Is this normal or damaged.

Normal

Promoted items from Pinside Marketplace and Pinside Shops!
Trade
Machine - For Trade
Richmond, VA
From: $ 12.00
Flipper Parts
Precision Pinball prod.
 
$ 210.00
$ 9,250.00
Pinball Machine
Pinball Pro
 
$ 14.00
Playfield - Other
Creekside Hideaway, LLC
 
$ 8,000.00
Pinball Machine
Classic Game Rooms
 
From: $ 20.00
Cabinet - Other
Filament Printing
 
From: $ 29.95
Playfield - Toys/Add-ons
RavSpec
 
$ 30.00
Cabinet - Other
Creekside Hideaway, LLC
 
From: $ 30.00
Cabinet - Other
Rocket City Pinball
 
$ 299.00
Cabinet - Armor And Blades
Eville Pinball
 
$ 75.00
Playfield - Toys/Add-ons
Creekside Hideaway, LLC
 
8,950
Machine - For Sale
St. Petersburg, FL
$ 9,250.00
Pinball Machine
Classic Game Rooms
 
$ 22.95
Playfield - Toys/Add-ons
ULEKstore
 
Trade
Machine - For Trade
Rocky River, OH
$ 15.00
Cabinet Parts
Mödley Crüe
 
8,995 (Firm)
Machine - For Sale
Littleton, CO
$ 39.50
Cabinet - Sound/Speakers
Pinball Haus
 
$ 30.00
Cabinet - Other
Creekside Hideaway, LLC
 
$ 50.00
Playfield - Toys/Add-ons
T&T Mods
 
$ 15.00
Playfield - Protection
Pinhead mods
 
Hey modders!
Your shop name here
There are 15,395 posts in this topic. You are on page 223 of 308.

Reply

Wanna join the discussion? Please sign in to reply to this topic.

Hey there! Welcome to Pinside!

Donate to Pinside

Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!


This page was printed from https://pinside.com/pinball/forum/topic/cactus-canyon-remake-club-new-sheriffs-in-town/page/223 and we tried optimising it for printing. Some page elements may have been deliberately hidden.

Scan the QR code on the left to jump to the URL this document was printed from.