I installed new lights in my Terminator 2 skull - eyes & they did not power on. There are some other lights that don't light up also. Would the burnted plug I pointed out in the photos be the issue? Thanks

IMG_20150413_190231.jpg

IMG_20150413_185026.jpg

Thanks LTG.... I can figure out how to add a new plug but pins on a board? Not really. Does the board in this case always need new pins?

Thanks.... do you know where I can send the board to have someone put new pins on?

LTG - PM sent

If I can't find my correct correct crimping tool for these connectors... would a plyers do the job?

I think I found the tool I was looking for. Is this it?

IMG_20150514_185517.jpg

Thanks again Lloyd !!

There are 3 holes where 2 wires go in. Is this right? It's a big pain getting the connectors crimped. Practice makes perfect... Glad I have extras.

If I went to Menards or Home Depot... what gauge wire would I need?

That's a good idea...

Ok... I messed up & lost track of which wire goes where... Would someone please attach a picture of the connector & where the wires go/come from? Thanks soooooo much!

Lloyd... PM sent

I meant the wires on the particular connector...

IMG_20150515_233537.jpg

thanks gcp & Lloyd. I opened my Funhouse & the connector & that photo from the website looks different.... to me anyways.

So... there are some of the same wires looping through different places on the connector? I'm looking at a Funhouse next to my T2... The connectors look different... I'm wondering if I'm over my head in this.

IMG_20150516_161927.jpg

IMG_20150516_161831.jpg

IMG_20150516_161851.jpg

The thing is... The connector I have doesn't let me use the same wire & have it go through 2 holes.

It works!! Thanks again for your help!