Batman Forever
Sega, 1995I was working on my new Batman Forever and see that one of the bulbs has been disconnected. One of the leads (the yellow one) is still attached, and the red one has been detached. I looked around nearby and found 2 red wires that have been cut at some point. Should I just connect one of those to the bulb? Does it matter which? Does the lamp socket look like it needs to be replaced? Thanks for your help.
20150316_191244.jpgI see where the socket will go. Looks like that big oval insert.
Look in your schematic to make sure wiring is correct but the two red are likely supposed to be together (daisy chaining power or ground)
Check with meter for voltage instead of guessing. If it happens to be solenoid voltage bad things will happen.
So a new machine nice.
You could go in lamp test and do the voltage checks.
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bulb-wiring-should-i-connect-this and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.
East Aurora, NY