I bought a kit ages ago along with a Harbor Freight press.
It sat for many many years before I finally assembled everything.
It came out great.
I plan to make a YT video of mine, describing where I made mistakes.

Thank you for this post.
I appreciate you taking the time to make this available.
--
Chris Hibler - CARGPB #31
http://www.ChrisHiblerPinball.com/Contact
https://www.youtube.com/c/ChrisHiblerPinball - My YT Channel
http://www.PinWiki.com - The Place to go for Pinball Repair Info

Here is mine.
I appreciated the step by step directions.

Mine was a bit long in production because my Craftsman 8” drill press didn’t have a long enough column to do the job right. My brother, a master machinist, lengthened the column by adding 14” or so to it. The drill press is so much more useful now.

I made two mistakes building the River press.
Both were drilling the 1/8” hole for the pin that locks the rotation. Although I measured, punched, and carefully drilled, I missed the mark twice. Oh well.

It surely gets the job done. Love it.
—
Chris Hibler - CARGPB #31
Http://chrishiblerpinball.com/contact
Thank you for checking out the PinWiki - http://www.PinWiki.com/
61A5CFCF-B02E-436E-9507-BD69196DE6D1 (resized).jpeg