Hi.
I cannot get my turntables to behave properly. I removed them in order to change the flashers underneath then put everything back together but obviously did something wrong..
Where is the darn start position for both tables ? The manual makes no mention about it.
Enclosed are two pics... I assume the spring should go through the hole in the bottom turntable, or not ? If this is done then it will not spin correctly. You can hear the motor trying to turn but obviously one of the hooks ist then at end position and won't go further.. However I try the constellations, both tables are out of sync when spinning and line up totally offset..
Is the spring in the pic already in a wrong position default ? Should it be turned, it's connected directly on the motor.
Is the spring's purpose only to push the bottom turntable upwards in order to lessen the friction or does it play a role grabbing any of the hooks when inserted through the hole of the base ?
Pls any help or guidance is highly appreciated.
Thanks
Matt