Quoted from Pesmerga:Hello guys, I'm having problems with the tombstone installation..it seems that the result with it installed is too high and the glass can't go further! Anyone solved the same issues? I can't even put a screw on it..Thanks
Mine was initially scraping the glass slightly, but eventually settled down a little bit. Do you have the right size hex extenders?
Quoted from Colsond3:Mine was initially scraping the glass slightly, but eventually settled down a little bit. Do you have the right size hex extenders?
Yes they should be the originals! Anyway it seems to be settled down but it's not possible to install the screw on it..it would touch the glass definitely!
Quoted from Pesmerga:Hello guys, I'm having problems with the tombstone installation..it seems that the result with it installed is too high and the glass can't go further! Anyone solved the same issues? I can't even put a screw on it..Thanks
[quoted image][quoted image]
I too had this issue and scraped my glass a bit with the screw, but I know all these games have a bit different clearance (always have to keep that in mind with my own modding). Still a huge improvement over the original.
If someone is looking to save $11 on a used one (like new), I'll let mine go for $44 shipped with the unused decals (please PM me if interested).
Quoted from Medisinyl:I too had this issue and scraped my glass a bit with the screw, but I know all these games have a bit different clearance (always have to keep that in mind with my own modding). Still a huge improvement over the original.
If someone is looking to save $11 on a used one (like new), I'll let mine go for $44 shipped with the unused decals (please PM me if interested).
Still available. $38 shipped? (used with unused decals).
20190106_203225 (resized).jpg@Pesmerga:
i'm sorry, did not read your post earlier, somehow i don't get email notifications when there is a new reply on the topic..
could you trim the hex spacers a few mill down?
or thinner, or less washers in between.
think that would solve the issue.
Quoted from Morpheus:Pesmerga:
i'm sorry, did not read your post earlier, somehow i don't get email notifications when there is a new reply on the topic..
could you trim the hex spacers a few mill down?
or thinner, or less washers in between.
think that would solve the issue.
After some adjusting now it seems so fit fine, I can't put a screw in it though, but it won't go anywhere!
Quoted from Medisinyl:Still available. $38 shipped? (used with unused decals). [quoted image]
$29 shipped? ($26 off new price)
Added over 5 years ago:SOLD
Quoted from Morpheus:..Colson, how's the update on the group buy?
the covers are ready for shipping.
You had said you didn't really want to do a group buy, so we talked about me possibly grabbing a few to have them handy in the States for easier access / shipping for U.S. buyers. Unless somebody PM'd you something different? I was waiting for enough interest before grabbing a few more if other people over here in the U.S. or maybe Canada wanted them. Last time we spoke, you had said you were low on stock and had to make more. I've gotten a message or two since you posted, so I'll shoot you a PM.
sorry for the confusion then.
from #780 on, i thought there was a new group buy starting.
no more group buys. covers can still be ordered direct from me.
many thanks to Colson for the past two group buys.
you have helped out a lot of folks getting their covers.
Just got my Coffin Cover Mod from Morpheus. Ordered it directly, USPS lost my shipment and Morpheus sent me another shipment at no charge! Great service and love the Coffin Cover Mod!
Quoted from Morpheus:up please.
the Drac covers are still available.
I would like to order one if available. Thanks.
I agree! Looks like it should be there.
Ron coffin is the only way to go! Not a fan of the aftermarket toy versions
WTF were they thinking when they designed that original one? My God. I had to change mine too.
Quoted from Jigs:Ron coffin is the only way to go! Not a fan of the aftermarket toy versions
I thought I was the only one that prefers Ron in the coffin. The coffin mod just doesn't fit well with the look of the playfield IMO.
Quoted from Morpheus:up please.
the Drac covers are still available.
I need a cover. I just got a BSD and mine was missing.
PM’d ya! Hopefully still got more!
74E3DC40-F0F2-43CA-80E7-F10EC8E329D0 (resized).jpeg86274450-AD03-4A78-A4BC-60571B7E9DF4 (resized).jpegD7C989F8-FDB2-44BE-81C7-0E9867EBDDC5 (resized).png
Hi, I received my tombstone mod and it is a very very well-made item. Obviously Morpheus has done the difficult task of precisely measuring and fitting this to the existing parts inside the game.
It came with new decals for the coffin sides and a note about using LEDs to avoid overheating the plastic. Sorry for the blurry photos. I will post a follow-up when my game restoration is complete and I have this in place.
-Zee
20200924_075527 (resized).jpg20200924_075549 (resized).jpg20200924_075626 (resized).jpg20200924_075652 (resized).jpg20200924_075702 (resized).jpg20200924_075748 (resized).jpgQuoted from Morpheus:no problem. they are still available.
PM sent.
Don't forget my PM thx
Should have mine any day. Loved the first one I got but sold it with the machine. Replaced mach8ne only means replace the cover.
Hey guys. Mine never had a cover so I’m not sure the purpose of the little post on the bottom of the tombstone.(bottom corner of back of cover) I actually don’t have that post either. So sorry to sound dumb but What’s it’s purpose? Also is it a particular size/shape post I’ll need?
Quoted from Aflacjack:Should have mine any day. Loved the first one I got but sold it with the machine. Replaced mach8ne only means replace the cover.
We should have got together for shipping. Lol
Mine should be here any day too.
Quoted from Magicmike0:Hey guys. Mine never had a cover so I’m not sure the purpose of the little post on the bottom of the tombstone.(bottom corner of back of cover) I actually don’t have that post either. So sorry to sound dumb but What’s it’s purpose? Also is it a particular size/shape post I’ll need?
We should have got together for shipping. Lol
Mine should be here any day too.
That little post prevents balls from getting trapped IIRC.
Gord
Quoted from GRB1959:That little post prevents balls from getting trapped IIRC.
Gord
Ok didn’t know if it somehow helped with even more stability for the ramp so the ball wouldn’t be rejected a lot. I had a lot of rejects before I finally got the plastic piece that goes above the right ramp. Even still sometimes it rejects, but makes it about 90% of the time.
Finally got mine! Been putting it off too long! Great job with the design Morpheus
It’s perfect! Only small modifications I had to make took 5 seconds to bend the left light socket tab backwards a little with some needle nose pliers.
Thanks again @morpheus! This one little mod changes the look of that bad factory curved one, and especially helped mine since it was missing a cover. Not sure how to arrange the pics on here anymore, so the first pic is of the tab already bent. The second just showing me grabbing it with pliers. 8C47DACC-1DFD-4826-A7F8-E174F8A427E8 (resized).jpeg19B7D784-84DE-4190-983C-1857768B390D (resized).jpegBE883D0F-25F6-4576-BFCB-E4B1B928B620 (resized).jpeg6E035B8C-7A1C-4B78-AAB6-F1F2E64BEB7C (resized).png
Quoted from Magicmike0:Finally got mine! Been putting it off too long! Great job with the design morpheus
It’s perfect! Only small modifications I had to make took 5 seconds to bend the left light socket tab backwards a little with some needle nose pliers.
Thanks again morpheus! This one little mod changes the look of that bad factory curved one, and especially helped mine since it was missing a cover. Not sure how to arrange the pics on here anymore, so the first pic is of the tab already bent. The second just showing me grabbing it with pliers. [quoted image][quoted image][quoted image][quoted image]
We ordered ours about the same time. Mine cleared customs on Nov 27. Now if the stateside post office can just get it here.
Quoted from Aflacjack:We ordered ours about the same time. Mine cleared customs on Nov 27. Now if the stateside post office can just get it here.
My last update was on the 25th, and no updates until yesterday the 9th showing “shipment in depot”. Then delivered the next day after the update. Hope it comes soon bud.
B1DD595B-3325-45F3-BAFF-37CBD0DA7A1D (resized).jpeghm. usualy takes about 7-10 days to reach your adress in The States.
seems customs is still holding your parcel, even though the status tells different..
Quoted from Morpheus:hm. usualy takes about 7-10 days to reach your adress in The States.
seems customs is still holding your parcel, even though the status tells different..
Yeah customs probably just gets to it when they get to it. They are definitely in no hurry. Still, worth the wait! Thanks Morpheus
Got mine today along with a sticker from the postmaster saying sorry my box was all smashed up. Luckily the part was all ok. Thanks Morpheus for doing this!
1571D755-B695-400E-898D-8F272D92BC2A (resized).jpeg9843D162-4793-467E-B0D8-964B3F8E1D38 (resized).jpegECCFD9F7-320F-4248-A713-D0CEA4DD4C77 (resized).jpegNice
Quoted from Aflacjack:Got mine today along with a sticker from the postmaster saying sorry my box was all smashed up. Luckily the part was all ok. Thanks morpheus for doing this!
My box was smashed pretty bad too! Haha. Wasn’t sure if it was from customs or where my mail lady crammed it in the mailbox.
Glad you got yours, neighbor.
Does anyone have an extra one of these in the USA that they'd be willing to sell/ship to VA? Or, if they're still available @morpheus, let me know what the cost would be to buy from you and ship to VA zip code 23112 in the USA. Thanks!
Wanna join the discussion? Please sign in to reply to this topic.
Great to see you're enjoying Pinside! Did you know Pinside is able to run without any 3rd-party banners or ads, thanks to the support from our visitors? Please consider a donation to Pinside and get anext to your username to show for it! Or better yet, subscribe to Pinside+!
This page was printed from https://pinside.com/pinball/forum/topic/bsdracula-3-d-tombstone-cover/page/17?hl=smcclain65 and we tried optimising it for printing. Some page elements may have been deliberately hidden.
Scan the QR code on the left to jump to the URL this document was printed from.